Aluminum Cylinder Head And Single-Plane Intake List

Discussion in 'Small Block Tech' started by TuBBeD, Jul 31, 2003.

  1. BKGRAY

    BKGRAY Active Member

    31.BKGRAY-(Intake&Alum.heads
     
  2. roverman

    roverman Well-Known Member

    For a mere10-15 k, Wildcat can set you up with a nice 4" bore alum block, raised cam and pretty decent heads and intake combo's. Leave all that rusty iron behind. NOT an endorsement, roverman.:blast:
     
  3. roverman

    roverman Well-Known Member

    >Proffessionally ported Alum. Stage II V6 heads flow over 360 cfm.(28"/.8 lift). Is that enough ? roverman.:laugh:
     
  4. Sabotage_666

    Sabotage_666 Guest

    Yes a set of aluminum heads and a single plain intake would be most appriceated.
     
  5. troys66

    troys66 New Member

    There's 2 300 ci aluminum intakes on eBay right now.
     
  6. charpesd

    charpesd Member

    It's time for the single plane to come out. I've been holding off on my purchase for over a year, please introduce it so I can be one of the first. Thank you

    (my head purchase will come next year when the $$ flowith deeper).
     
  7. thebuick

    thebuick Well-Known Member

    add me in for a pair of heads,thanks
     
  8. shadetree6981

    shadetree6981 Active Member

    I can't commit to it, but I would definetly be interested in a set of heads! Quite possibly an intake as well, provided I can start making more $$.:pray:
     
  9. Lory's 350

    Lory's 350 Active Member

    Need some of these Heads, for a High Performance 350 in germany!
     
  10. Matt D

    Matt D Active Member

    Hi, I have a 1964 300 cuin 4 bbl. Complete motor except the carb. I'm keeping the carb for my 64 LeSabre convertible. Aluminum heads and intake manifold, all original. It ran when I removed it from the car. It comes comes with starter, alternator, PS pump, water pump (I'd change that though), distributor, air cleaner. The whole package except the carb. I'd like to get $1,000 out of the motor package. I will have pictures and serial number tomorrow and can send by email. Motor is in Pittsburgh area. Extra $75 gets the motor stand too. Email me if you have questions...
     
  11. sean Buick 76

    sean Buick 76 Buick Nut

    You would be lucky to get $100 for it, no offence.
     
  12. Matt D

    Matt D Active Member

    No offense taken.
    The aluminum heads and intake mainifold are in hard to find. They're worth more than $100 to someone - maybe not you. I am open to offers, but I'm not giving them away. This was my spare engine, I'm just clearing stuff out of the garage now. Also have a Super Turbine 400 transmission and a 1964 LSD rear end (which I have not removed from the car yet)...
    Thanks for your input.
     
  13. sean Buick 76

    sean Buick 76 Buick Nut

    That is true, you may get $200 for it. I would post an add in the parts for sale section if you have not already.
     
  14. Knobby-san

    Knobby-san Knobby-san

    Any new updates on the 350 heads??? :Do No:
     
  15. Tricolor72

    Tricolor72 Well-Known Member

    +1 just something, some little piece of information to let us know R&D is on going and that an aluminum top end for the 350 is not just a dream
     
  16. roverman

    roverman Well-Known Member

    I'm finding it had to believe, no one has bought a set of TA Rover heads-yet ? Share ? Intake to fit ? Cheers, roverman :Dou:
     
  17. Fox's Den

    Fox's Den 27 years of racing the same 355 Buick motor

    It is now time to start asking for heads for the 350 Buick. Forget the Rover head thing it will not work. The time is now.
     
  18. Nothingface5384

    Nothingface5384 Detail To Oil - Car Care

    ill do thje rover thing in end f 2012 or somewhere by 2013 if TA has yet to produce 350 heads..

    but according from an old posting from Ta...we still have to wait for redesigned BBB heads and 350 s/p intake before they think about AL 350 heads
     
  19. Jim Blackwood

    Jim Blackwood Well-Known Member

    Sounds good Mike. Anything I can do to help just ask.

    JB
     
  20. Fox's Den

    Fox's Den 27 years of racing the same 355 Buick motor

    2013 time to get those Rover heads.

    ---------- Post added at 09:32 AM ---------- Previous post was at 09:29 AM ----------


    Well it has been 10 years now, how many of the people on this original list still want the parts. Even the intake did not happen.
     

Share This Page