Shortly this 482 will be buttoned up with a hydraulic roller.
A buddy dynoed his iron 494, Stage 2 SE, 608S, 1150 Dom today. Good hp numbers that were still climbing but I say oil pressure is tooo low. 57 at...
Wondering if headers can be re and re’d if using arp header stud kit? Just looking at saving the aluminum threads in the heads. My headers will be...
[MEDIA] Found this bad ass GSX on YT. Says he has it all stock except for the cam, TH400, longtube headers and a H-pipe with 3 inch exhaust all...
So. I bought this beautiful 70 GS tribute 455. Absolutely knowing that it was going to have issues. Ex heavy street racer. But nice paint, top,...
TA S2 aluminum heads / TA roller rockers / hydraulic roller cam and Johnson 2112OPR hydraulic roller lifters. The Johnson 2112OPR hydraulic...
So I bought this street race type car with the intention of making it more streetable. The car is beautiful. The guy passed but I was able to...
i have cc’d the combustion chambers on my TA heads, the number is 66 Anyone know what the heads would have to be cut to get to 65 or 64 cc’s? 10...
Trying to get things I need for the Supercharged motor to be ready for the spring thrash. Motor currently has a MSD HVCII coil,planning on a MSD...
On my JAGUICK.... I switched to 28x10 in drag radials to run 10.00 index class (hd 28.5x11.5 slicks). My trap rpms are 6400 at 135 regardless of...
Goal for my 72 GS is to be primarily a street car, be able to run low 12’s high 11’s when the slicks are bolted on at the track. I do not have...
I am selling a NEW set of Professionally ported STG2SE Plus Heads, 11/32 2.160/1.755 Valves, . They Flow 353/255 @ .600 lift $3550 + shipping....
Hello, I have a 1967 Skylark that I am building a 1972 Buick 455 for. I am in the planning part of the build and don't want to make too many...
I have a set of new stage 2 SE heads. (yay) The intake and exhaust ports look amazing in the stock unported form. What gains can be accomplished...
My spec sheet on my heads shows 64 as the head CC. An engine builder I have is questioning that. He wants to verify. Out of my own curiosity does...
ok! here goes!! I found a 74 455 Block, Its out being sonic checked and the crank is being inspected. Im leaning to build a 470 but its not set...
As the title states, post your reliable 10 sec race only builds, looking at building a 455 for a 69 skylark post car that will be track only and...
I ordered no notched forged pistons and cam from TA while my '73 455 block was at the machine shop. TA said I wouldn't need notched pistons with...
Have the TA SE series 2 heads (455) always used a plug with a 3/4" reach? I suspect someone may have put the wrong plugs in this engine. What...
What plugs are people running in their T/A Stage 2 SE heads? Is a BP6ES the one? Thanks.
