1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

New GSCA M/T headers

Discussion in 'Parts for sale' started by collector, Feb 4, 2011.

  1. collector

    collector collector

    The GSCA is off this month and they have about 20 extra sets available on a first-come first served basis. They say this is the last run. They are slated to be built next month for April delivery. So, if you want a set, contact me here or cell may be better. 615 596 8522. Price is $680 plus shipping. They come with everything needed for street hook-ups, gaskets, bolts, etc. They are ceramic/ chrome plated. ( Hope I said that right! ) I am not on the board but every few days so be patient if you post here for a set. Deposits of $200 and balance when ready for shipments or full payments even better! Don't miss out, they say this is for sure the last run.....!

    JKC
     
  2. Racerx88

    Racerx88 Platinum Level Contributor

    I'll take a set.
    Deposit sent via Paypal.
     
    Last edited: Feb 8, 2011
  3. 197064buickspec

    197064buickspec 1964 Special Post-455

    l would like to get on the list. I will pm you for info. Thanks.

    Brian
     
  4. pooods

    pooods Well-Known Member

    I'm up for a set. Check your PM's. Putting faith in them being made by April since my engine will be back in late that month.
     
  5. BuickGSrules

    BuickGSrules Gold Level Contributor

    A set for me too. Have sent a PM. How to pay? paypal?

    Jan
     
  6. BUICKRAT

    BUICKRAT Got any treats?

    In line, will call for payment details!:TU:
     
  7. Inrush2

    Inrush2 Well-Known Member

    Put me in line as well.

    Denis
     
  8. Greg H

    Greg H Active Member

    Do these fit A/C Cars?
    If so place me in line.
    Calling to find out details
    Greg
     
  9. carmantx

    carmantx Never Surrender

    If anybody wants to sell any old headers they have, when you get these new ones let me know. My budget is too low for new ones.
     
  10. Racerx88

    Racerx88 Platinum Level Contributor

    Both my previous sets did with no problems.
    Just had to reroute/modify the trans cooler lines (automatic) to clear.
     
  11. dynaflow

    dynaflow shiftless...

    Wish I could...already in line for set of TR headers...the GN is more "needy"..:grin:
     
  12. Dstoltenberg

    Dstoltenberg Well-Known Member

    Anyone know how these fit with manual transmissions?
     
  13. Jim Rodgers

    Jim Rodgers Well-Known Member

    They fit fine with manual transmission. May have to relocate the clutch return spring, but no biggie.
     
  14. Johnny Angel

    Johnny Angel Well-Known Member

    Is there any hp advantage with these, over say Hooker 1 7/8 headers? Also, what is the big difference in the sound? Thanks.

    John
     
  15. Racerx88

    Racerx88 Platinum Level Contributor

    Frankly, you just have to hear them IN PERSON to understand.
    I doubt there's any real difference performance-wise to any other 1-7/8" BBB header.
     
  16. MGSCP

    MGSCP Guest

    :gp: WHAT HE SAID.......:bglasses: :bglasses: :bglasses:

    I have a set from the first run back in 1984...and they still sound great.....

    :idea2: :shock: WOW......they have been on the car for 27 years......:TU: :TU:
     
  17. Inrush2

    Inrush2 Well-Known Member

    Any modification needed, such as putting a dent to clear something?
     
  18. 70455ht

    70455ht Well-Known Member

    Put me down for a set!
     
  19. corvettzo

    corvettzo Platinum Level Contributor

    Please put me down for a set .
    Thanks ,
    Chuck
     
  20. pooods

    pooods Well-Known Member

    Collector, the money is sent. Let me know if I owe you more for the shipping.
     

Share This Page