There has been a lot of talk and interest in the completion of the single 4bbl aluminum intake from Eelco that I started a few years back. This thread is for anyone interested in getting one when they are available. I will work on getting the tooling up and running and replacing the missing parts of it over the next few months. No deposit will be needed and expressing an interest does not obligate you to purchase on when they are ready. They will be offered to those who express a desire to own one in the order of posting. This is the only place I will offer this opportunity. please understand that this will be several months down the road as I work on it when time permits. A few details about the intake. Dual plane design similar in style to the 2x4 and 3x2 Shorter than the 2x4 by about .500 inch (velocity was too high otherwise) Square bore only (spread bore adapters are everywhere.) 401-425 applications only. Thanks again for all the support.
Wait a minute! Last time around you said I was first on the list. Make two and Tom and I can both be first on the list. :grin:
Ill get in line and show some interest. Would be interesting to see for sure. Also to see if maybe the square bore could be further machined after purchase to possibly fit a spread bore without an adapter. Dont expect you to offer both as they are different which means additional tooling and setup.
I would also be very interested in one also. for those who remember the resto I started 4 yrs. ago my project just went to the body shop last sunday!
Will this flow better then the stock manifold? Will the flow be more equalized then the stock manifold? Will it directly fit a Holley square bore? Add me if the answers are yes to all of those questions. Cheryl
