1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

Regal guys : How about some pics for motivation?

Discussion in 'V-8 Buick Powered Regals' started by Running, Aug 19, 2007.

  1. m louk

    m louk Well-Known Member

    Mike, here are a few photo's, in a couple of them you can see the metal plates that end up being glassed over after you've got eveything lined up. This was the first time I ever did this type of fabrication, like anything else measure -check and check again. I set the front wrap on jack stands and wood blocks to line it up. Then pop riveted the mounting plates in place and tack welded the support rods to the plates. I had to trim the hood and fender area by the windshield and doors ( front wrap was long ) to get mine in proper position in relation to the front tires. The arrows point to pivot collars that I installed and welded the support rods on, as the horizontal rod they are on is stationary. The end support rods slide into the each end of the main horizontal rod and they pivot. Like you I wasnt sure I wanted to go this way but once I started I knew it was what I wanted. Not sure of the gain I'll get in performance, ( weight ) but I've found the access to any work up front is well worth it. I can easily remove/install or open close it by myself. Hope this helps. Keep me posted...........Mike
     

    Attached Files:

  2. Running

    Running Midwest Buick Mafia

    When I get more time I will be taking a real close look at this. thanks for posting it ! Looks pretty cool though!
     
  3. v8regalowner

    v8regalowner Silver level contributor

    poor dirty thing. just got dropped back off from having dual 3" with the xpipe and flowmasters put on it. dam shop parked it under the lift with a snow and mud covered car hanging above it.(little pissed) cant really wash it in the snow before i pull it back in the garage. 455s sure do sound nice with big pipes :TU:
     

    Attached Files:

  4. Running

    Running Midwest Buick Mafia

    I'd be pissed too! Your car looks pretty straight! You should video tape it as you pull it into the garage then post it here! Easy right? lol... Nice ride
     
  5. carhell

    carhell Well-Known Member

    A few new pics. Shawn
     

    Attached Files:

  6. v8regalowner

    v8regalowner Silver level contributor

    nice car. to live in a place where you could drive all year around.:pray:
     
  7. Running

    Running Midwest Buick Mafia

    I used to say that about racing dirt bikes ... then I figured I couldn't afford the parts all year! What to do......

    Nice pics, keep them coming :TU:
     
  8. Don Palumbo

    Don Palumbo Well-Known Member

    Aintno 8
    What upper radiator hose application is that? I need to figure out which upper and lower hoses to use for my swap. Was a Turbo V6
    Thanks in advance, Don
     
  9. m louk

    m louk Well-Known Member

    I picked it up at Car Quest auto parts asked for upper hose for 68 GS 400. Sorry I don't have their part number. Lower hose is a flex as it fit best for where I positioned the radiator. Hope this helps.That is a wicked launch pic.........Mike
     
  10. carhell

    carhell Well-Known Member

    Hey Dan, I used a upper hose for a 70 GS with a 455. I think the auto parts store showed it as a Skylark with a 455. Not sure about the lower hose though. Hope this helps. Shawn
     
  11. Running

    Running Midwest Buick Mafia

    very wicked :TU:
     
  12. Don Palumbo

    Don Palumbo Well-Known Member

    Thank you to both of you for the hose info. Big help. The picture of the car leaving was at Reynolds 2006. The car kept coming up (all I could see was HOOD!!) somehow I shifted to 2nd and let out of it slowly and it came down without hurting anything. That was a 25lbs of boost launch. I never did that again...LOL:eek2:
    Thanks again, Don
     
  13. lone racer

    lone racer wana race???

    This is my 79 pontiac 400 powered regal, currently receiveing the following ,cutting f/r bumpers to tuck closser to body and blast to paint, installing aluminum deck and hood w/4"cowlinduction,f/r sway bars,frame braces,8.5 3:42,(broke 2 7.5"s last year) and a nice deep metalick black car is capable of mid 13's on low comp,stock crap 72 vintage 7j2 heads,and stock manifolds
     

    Attached Files:

  14. KRL077

    KRL077 Well-Known Member

    I don't have any decent pics yet but here is some video of my Regal courtesy of the previous owner:

    http://www.youtube.com/results?search_query=455+regal&search_type=


    Btw, Don thats one heck of a launch pic! I have a "wild launch pics" thread in The Bench area maybe you could post it there, its definately deserving:TU:

    -Rob
     
  15. Running

    Running Midwest Buick Mafia

    Nice looking ride :TU: I will show a buddy what you have, he has a T-type, a GN and a GTO , and he loves Pontiac's. Your combo will make him smile.

    Welcome to the "board" !
     
  16. Running

    Running Midwest Buick Mafia

    Man that thing takes off hard :TU:
     
  17. roboteq-1@hotma

    roboteq-1@hotma 76 T Top

    you're making me sick, mine had the Buckskin landau top to match the interior - its now in Buick Heaven.....
    Nice Car!!
     
  18. roboteq-1@hotma

    roboteq-1@hotma 76 T Top

    Hey there- I'm in the beginning stages of a 77 regal 455 repower - any help you can offer or sources?? I keep coming up dry!!
    Thanks
    Robert
     
  19. sharkmonkey

    sharkmonkey Give me something to hit!

    What kind of resources do you need? This site has a wealth of them. Just ask.

    -mark
     
  20. Running

    Running Midwest Buick Mafia

    Click on the finishline link below .. these guys are good people
     

Share This Page