Weight of a fully assembled TA stage 2 head, weight of a fully assembled cast iron head?

I should have done this before assembling, trying to track component weights. Anyone know these weights? Thanks

 

If it’s still a question in a week I will weigh my new stage 2’s and let you know.
Cliff

 

Thanks Cliff. I know the aluminum heads still weigh a fare amount. I would have weighed my cast iron heads, but the motor I removed is staying intact as a display pce (or spare if needed)

 

I weighed the 2inch stage 2 headers…..might surprise you that both headers and collectors come in at a hefty 42.8 lbs
Both cast iron manifolds and downpipes to cross member weigh in at 44.52 lbs.
so saving 1.72 lbs

 

I just shipped 2 cast iron heads and they were about 100 for the set........my aluminum heads are drastically lighter and are far lighter bbc heads.......if I have time tomorrow I will but both on the scale to compare

 

Should be 25-30 per head,less.

 

Thanks everyone

 

When I bought the Stage 2 heads from Guy,I was shocked at how much they actually weighed. But, still lighter than a cast head.

 

Cast 455 heads loaded 64# wrapped in cardboard. Maybe 2-3# of cardboard.

 

Iron head complete- 1970 stock std valve- 62.8 lbs

TA STG 2 SE head complete- 31.0 lbs

JW

 

Thanks everyone for the responses. the headers versus cast exhaust manifolds is tiny weight savings. The heads are considerable…..63.6 lbs weight reduction.

anyone know the weight of a cast iron 1972 intake?

weight of a TA SPX?

 

I stumbled onto a document the other day that had the weights listed for virtually everything.
Long block
Starters
Alternators
Water pumps

I've searched for 4 days and cannot find that list.

 

It's in the race 400-430-455 section for weight loss tables

 

This might help?

https://www.v8buick.com/index.php?threads/what-does-my-455-weigh-need-a-little-help.135506/

and

https://www.v8buick.com/index.php?threads/455-weight.341133/

Devon

 

iron exh manifolds: 34 lbs > T/A shorty headers: 20 lbs
[missing from weight tables]

 

Stock 73lb crank vs billet 56lb crank. It helps in more ways than one.

 

My crower crank weighed 83lbs Brian yours had to be gundrilled and the weights cut?

 

I got a crank here in the corner I used to do curls and triceps extensions with when I was working out ha