Original intake manifold bolts

I need a 70 455 big block set.
thanks,
DL

 

I'm sure I have a set from a 300 CI..if that would work for you.

 

I MAY have a small block set.... Which ones are you looking for? And, what year?

 

Hey DL
I may have some I'll check later.
I'll give you what I have if I do.

 

Ok ,the BBB 67-69 have smaller bolts then 70 and up.70 uses only one size,71 and up use 4 -70 size and 8 longer bolts ,I have a couple sets of the longer bolts..SBB mostly are the same size,but on these I'm not too sure.I have a few sets for the 67-69 BBB bolts and a lot of the SBB bolts

 

Bruno,
I could use a set of the 67-69 BBB bolts if you have any after DL gets his set.
Duane

 

I need 68 350 and
70 455 . I’ll amend post .

 

DL- 72 350 intake bolts work? They have the correct "half sphere indent" in the heads, like the 68's..?

 

Hi DL,I have a set of 350 for you,,as for the 70 short bolts,I'm all out of them.Send me a PM and we will talk about address and price,which will not be that big ,just a few $ and shipping.Anybody also that wants any of these bolts,just send me a PM and we will get together.Bruno.

 

Hi Duane,I send you a PM,hope you got it.If not,I asked for your address,send it to me.Bruno.

 

No luck on my end DL

 

Todd sells them. I bought a set from him and they're spot on. Same with every other thing he sells
http://www.diecastmusclecars.com/dcm455bolts.htm

 

Actually my Intake Bolts are close but they don't have the dish in them. That is a part that I'm working on getting made though. It's tough to find REALLY NICE Intake bolts. The dish in them holds moisture and in most cases the bolts have a bit of pitting inside the bowl area. I do have nice Grade 8 Flange bolts that are close but that's it for now. Hopefully we'll have some nice reproductions soon. A LOT of new products coming in 2019!!

Thank You Mike for the referral. . . . . . I see them and appreciate them!!!!!

 

I will look and see what I have. Good chance I have the 1970 ones but I could have a problem identifying them so I may text you some pics to see if they look correct.

 

Bruno took care of the SB set, so I edited post for the BB set. Thanks

 

I havefull set-one from 70 or 72?free for ship/kenny462

 

What is the difference between 69 and 70?

 

According to Bruno and others,
the BBB 67-69 have smaller bolts then 70 and up.

 

Smaller head?