*NEED BAD!! Rebuilt to the highest quality wiper motor for buick or Chevelle *

The Parts Place repros the part in that picture for the A bodies (not the unique Corvette version). If you buy a repro unit from most any of the repro vendors you can flip it over and likely find "The Parts Place" stamped into the metal housing.

 

Not meaning to hi-jack this thread but who does the resto on alternators or does Jamie do that ?

 

I dont do date coded diode numbers matching concours level rebuilding.I will look into it if there is enough interest.I would need a good cad plater before i would even consider it,or put the pulley/fan burden on the customer.Trust me,it wouldnt be cheap for me to secure the diodes.I am doing 3 stock 10DN rebuilt(firewall reg) alternators i will be listing soon,so check them out when i post:TU: fan/pulley painted black however:error:

 

Jamie I am not worried about the date coded diodes , my main concern is appearance . I will take care of he fan and pulley . Please let me know when the regulators are ready . I want one . Also does the stage 1 use a larger pulley than non Stage motors ?

 

the appearence is correct,on the pulleys,it would differ between A/c or non A/C(double being smaller).You might want Duane or someone more experienced than me to step in here,i'm just a longhair redneck rebuilder:Brow:

 

OK that sounds like a deal and the car is A/C .