*NEED BAD!! Rebuilt to the highest quality wiper motor for buick or Chevelle *

Looking for a company out there that either rebuilds old wiper motors or has some sitting on a shelf. Re cad plated, the whole ball of wax. For 68-72 GS Skylark and Chevelle. Need two right away. Is there anyone out there with this service? Any help would be appriciated. Thank You Randy

 

I have a working non-hidden wiper motor from a '71 Skylark you can have for cheap.

 

http://cgi.ebay.com/ebaymotors/68-6...rkparms=39:1|65:1&_trksid=p4506.c0.m245.l1318

 

Not bad looking piece, but outlet for pump needs to be white.

 

Jim thanks a lot for that info .

 

Thanks For the info Jim I think that the cup also has to be cad plated. Not sure but just looks Cheaply done. Thanks for looking though. There is suppose to be a guy in Illinois somewhere who does a really nice job but we cannot find him.. I have an Item number of 230274880942 thats all I have no Phone or name of company.. Any help would be appriciated.. Randy

 

These dont look to bad. I bought one of these I will let you know what they look like. Randy
http://cgi.ebay.com/ebaymotors/ws/e...STRK:MEWA:IT&viewitem=&item=250277089787&rd=1

 

The piece Mark references can be bought separately in white.

If the finish is an issue the one you bought is not as close to original as the one I linked. Much better price though.

Also I think there are two types so make sure you know whether you need the hidden parked wipers or not.

 

Who sells the washer pump separately in white? I've only seen them in black aftermarket.
Frank

 

Hey Jim, where can I get the white or what they call the gold pump pieces new? the guy who sold me this one says he cant get them in the GOld color anymore and they dont rebuild the pumps they are new in black. Randy

 

Seen this been there!!! Here is a picture of one I restored for my 68 corvette, note the barrel style terminals for the washer pump (corvette only), AL.

 

Here is another, AL.

 

Here is the finished project,,, AL.

 

Al who did the cad plating for you ? And what did it cost ? Looks good

 

I used Danny Tate at Wiperworks. wiperman57@msn.com or at 931-598-9573 or or at WiperWorks
244 Rattlesnakespring Rd.
P O BOX 57
Sewanee, TN 37375

 

Do this install... AL.

 

Thanks

 

Be a name dropper, it may help. Use my name AL form Hampstead MD. with the 68 Corvette, he will remember, AL.

 

I did did mostly my own work because the 68 Corvette is a one year only set up. This car has a vacuum operated wiper door that covers the wiper arms. The wiper/washer bring up to and around $500.00, AL.

 

Randy,
Year One has a "white" repair kit for the washer pump. Page 74 in the GS catalog item number AJ339 $14.00.
Loon