Liquidating 40 years of 455 engine hoarding!!!!

Discussion in 'Parts for sale' started by silvergs72, Jan 17, 2019.

  1. Waterboxguy03

    Waterboxguy03 Well-Known Member

    Would you happen to have a 73 fan shroud??
     
  2. silvergs72

    silvergs72 silvergs

    No fan shrouds.
    Sorry
     
  3. yachtsmanbill

    yachtsmanbill Well-Known Member

    Hey Mike... dropped the 455 Block and Heads off at Terry's engine rebuilders in Green Bay yesterday after sitting for 3 weeks in the back of the local shop... It was getting the plugs knocked out and ready for the hot tank before I left the place! The initial visual "Looks OK" was what Terry said. We'll confirm after the wash and sonic check today! Thanks, Bill in TR
     
    Last edited: Feb 7, 2019
  4. yachtsmanbill

    yachtsmanbill Well-Known Member

    Yo Mike..
    So the 455 was perfect and is now cleaned, bored, and honed at +.040 OS. The sounding on the rear side of #6 proved a .140" wall so after the bore was at .120" Thanks fer holding out! Bill
     
  5. silvergs72

    silvergs72 silvergs

    No problem Bill,
    I have one here that is 30 over and the back of 6 is at .103. Not really feeling that one.
    Mike
     
  6. CarolinaDrifter

    CarolinaDrifter Well-Known Member

    any stock 455 blocks
     
  7. CarolinaDrifter

    CarolinaDrifter Well-Known Member

    any stock 455 blocks
     
  8. silvergs72

    silvergs72 silvergs

    Have a couple left.
     
  9. silvergs72

    silvergs72 silvergs

  10. Detroit2cali

    Detroit2cali Active Member

    Hey 72 no luck with that timing cover
     
  11. Buickrat1

    Buickrat1 Well-Known Member

    I will take the 67 Exhaust manifold
     
  12. Buickrat1

    Buickrat1 Well-Known Member

    Send me your Paypal.
     
  13. silvergs72

    silvergs72 silvergs

    I pm'ed you my email.
    Thanks
     
  14. Buickrat1

    Buickrat1 Well-Known Member

    Money Sent
     
  15. Johnny Angel

    Johnny Angel Has-been...Who never really was.

Share This Page