I read a bunch of the previous post about carb spacers. Do I have the right idea? Here is my set up. I have a Demon carb and want to use a carb spacer to match it to my Edelbrock Performer intake. The motor is mild so a 4 hole 1 inch spacer is they way to go. Correct? The car is going to be a street strip car. I want all the torque I can get. I also like the idea of using a no-aluminum spacer for heat insulation. Have a Happy Thanksgiving
I ran a similar set up many years ago but used a 1" open spacer and the heat shield, I guess I need to do another search to see if anyone has any apples to apples dyno or track data :TU: After racing tomorrow, I want to try a 1" spacer for the next weekend, just don't know what style to use
Yeah, we race some in the summer, but this is the nice time! That's an old picture from my racing in the early 80's! :grin:
This is by far one of the best carb spacers out there. http://www.highvelocityheads.com/ss.htm Jim Burek confirmed at least a 40hp jump on the engine dyno by using this spacer.