which flywheel,clutch,pressure plate?

so i need to get the clutch,pressure plate,flywheel and release bearing and all the other little goodies. the motor is a 75 455. just wondering what type you guys are running. anyone running chevy stuff?

oh and im undecided on the tranny right now

 

Stock GM flywheel with an 11" Centerforce II pressure plate, clutch disc, and throw out bearing.

I am really happy with the pedal effort (nice), and the grip.

I have used Hayes and McLeod before, and I like Centerforce best.

 

Stock flywheel (resurfaced), Mcleod 12" clutch that fits stock 11" pattern, 12" street disc. Low pedal effort, great holding power. Stay with the bronze pilot bushing, the rollers have been known to come apart.

 

thank-you thats what i wanted to know

 

does anyone else want to share?

 

I'm using T/A's forged flywheel with everything else Centerforce. If you run a stock flywheel I would magnaflux it to make sure there are no cracks.

Brian

 

Brian

Any problem using the centerforce throw out bearing and the stock factory pivot ball? I read another post suggesting some issues arose with this combo.

 

I run a factory flywheel, a Hays 11 inch disk, and a Hays Borg and Beck pressure plate. I had to fabricate a clevis rod adjuster because the factory piece did not give me enough adjustment.

 

Jim,

I've had no problems at all. Do you know what thread discussed this issue? I'm curious.

Brian

 

Brian the throw out bearing that comes supplied by Centerforce is much shorter than stock.


http://www.v8buick.com/showthread.php?t=86810&highlight=lakewood