1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

Where do you get your sound deadener?

Discussion in 'Interior City' started by Ken Mild, Feb 21, 2006.

  1. Ken Mild

    Ken Mild King of 18 Year Resto's

  2. GStage1

    GStage1 Always looking for parts!

  3. evil16v

    evil16v Midwest Buick Mafia

    shop local car stereo shops and online ones as well.... there are several brands... they all work... and have variations for different apps.... a search for dynamat will turn a few leads up.... but there is probably a cheaper brand.

    no one is going to see it anyway.
     
  4. telriv

    telriv Founders Club Member

    Believe it or not I have had excellent results with house insulation. Varying thicknesses & light weight are 2 deciding factors.
     
  5. Ken Mild

    Ken Mild King of 18 Year Resto's

    House insulation is not meant for the floor of a car though. The tar like sound deadener's purpose is to absorb vibrations which fiberglass insulation does not do . House insulation is for keeping cold out.
     
  6. mn_leaf_fan

    mn_leaf_fan Active Member

  7. Ken Mild

    Ken Mild King of 18 Year Resto's

    Is this the stuff you got? How many square feet would I need? I have no idea what kind of car you have because you have no signature.

    I'm thinking 10 square feet would be just shy of what I need and I probably have to go with 20. Either way, it's cheaper than even buying the original type sound deadener as they are charging $60-$80 just for that everywhere I look.

    Thanks for the tip. This stuff is a hell of a lot cheaper than Dura"ripoff" mat.


    Specs:
    Thickness 65 mils (.065 in; 1.65 mm)
    Mass/Area .42 lbs/ft (2.05 kg/m)
    Heat Tolerance 475 F (246 C)
    Sheets 12.5inX24in (31.75cmX60.96cm)

    10 ft $25.00
    20 ft $49.50
    40 ft $93.50
     
  8. jadebird

    jadebird Well-Known Member

  9. sbbuick

    sbbuick My driving scares people!

    Cool. I used the bubble type with the foil on both sides. It worked great! AND Lightweight, too!
     
  10. Ken Mild

    Ken Mild King of 18 Year Resto's

    What are you guys talking about?? :puzzled:

    What is bubbly type house insulation?? :Do No:

    Are you talking about plastic bubble wrap used for packaging??

    I'm a little :confused:
     
  11. Babeola

    Babeola Well-Known Member

    I used Ultimate with good results in a non-Buick application. I covered the floorpan and trunk and it made a big difference (exhaust/road noise was too loud before).

    Cheryl :)
     
  12. TimR

    TimR Nutcase at large

    On the b-quiet ultimate stuff, how much did you use??? Just curious as I will be using that as well, since the guy lives in my city!!!

    later
    Tim
     
  13. Babeola

    Babeola Well-Known Member


    Tim,

    I used two rolls, and I got it from Ebay at a better price. You may want to check Ebay for prices on rolls (I think it is the samer guy). I completed the floorpan, under the rear seat, trunk, quarters and part of the firewall. There was enough left over to put a second layer in the trunk, but I decided it was quiet enough without it.

    Cheryl :)
     
  14. TimR

    TimR Nutcase at large

    OK, thanks. It is the same guy and he will pretty much match his e-bay price...so thats cool.

    Thanks for the info.

    later
    Tim
     
  15. sbbuick

    sbbuick My driving scares people!

    Look for it in the insulation department of a hardware story. It is like bubblepack in the middle, but it has metal foil on both sides. I loved it.
     
  16. pglade

    pglade Well-Known Member

    I was on a bulletin board one time where these folks were talking about a sticky backed roofing material they could get at Lowe's etc-another tar based product I think.....and it was extremely cost effective from what I remember. I think it is the same stuff I saw Bob Vila putting on the lower few feet of a roof on one of his shows as a moisture barrier. This stuff was placed under the shingles directly on the roof decking---"ice shield", "Ice barrier" or something like that. It was a material that had a peel-off/sticky layer on one side. We don't use that stuff down here but I'll bet it is readily available up north.

    Has anyone tried that avenue since most of these high $$ insulators seem to be based on a dense asphalt based type construction?

    I know, they have ones with lead, etc layers in them but they are priced through the roof! (Cascade Audio,etc.)
     
  17. Ken Mild

    Ken Mild King of 18 Year Resto's

    ice shield

    Thanks Andrew and Patton.

    Actually Patton, that ice shield stuff is exactly what my GTO resto guru friend told me to use. That's what he uses. Maybe I'll make a Depot run and check er out.
     
  18. copperheadgs1

    copperheadgs1 copperheadgs1

    Ames Performance Pontiac claims they sell original type tar sound ded with paper backing that has to be installed using a heat gun. Sounds like the original stuff. I think kit is about 60 bucks. they are made for a GTO but is probably the same as Buick. You can get catalog on line.
     
  19. pglade

    pglade Well-Known Member

    Ken---if you do end up getting some of the material I mentioned please do me a favor and post where you got it, general cost of it and the brand name---then I can see if it is sold down here. Thanks very much. Patton
     
  20. Ken Mild

    Ken Mild King of 18 Year Resto's

    Ok Patton, Will do.

    copperheadgs1; my Pontiac buddy got it through that same place I believe and it was then that he realized it looked like nothing more than ice shielding that you'd use on a roof. The heat gun is so it conforms to the contour of your floor boards. Once it does, it will retain that shape.
     

Share This Page