what fuel pump to use

Discussion in 'Stock Appearing' started by td99, Mar 22, 2010.

  1. td99

    td99 Well-Known Member

    to the guys running low 11's and into the 10's with a q-jet what pump are you using? and what size line? i was looking at a holley black but after testing one the other day it took 34 seconds to fill up a 1 gallon container.(kinda slow)

  2. Greg Gessler

    Greg Gessler GS Stage1

    I use a Mallory 140 in my F.A.S.T. Black GS.
  3. gusszgs

    gusszgs Well-Known Member

    Mallory 140 here as well. But with a hp1000. 1/2" line to and from
  4. td99

    td99 Well-Known Member

    well i bought a mallory 250 do you guys do anything with the inlet on the q-jet? i know they make an an fitting (where the filter is) pm me if you want

  5. 1QIKTA

    1QIKTA Well-Known Member

    I use a Holley 150 with -10 to 1/2 to 3/8 lines. No carb filter in the filter housing. 16 psi before the reg 6 3/4 psi after.

    The 150 fills a gallon in 21 seconds.
  6. td99

    td99 Well-Known Member

    man, i tried a trick flow 130 and it took 35 sec and the gallon wasnt even quite full so i figured it was going to need some more. doh


Share This Page