On my 72 GS auto colum im looking for the reverse wire, i need to hook up the reverse wire from my RS600 manual trans.
I think it's going to be the same as my car. Mine is a '77 X-body I converted from column automatic to a TKO-600 and the wiring was pretty easy. The neutral safety switch on the column also holds the reverse light switch. I used a stock set of clutch pedals on my car and the neutral safety connector that plugged into the neutral safety switch on the column, plugged right into the clutch pedal neutral/clutch safety switch and then on the reverse lights, it was a simple two wire deal, and I just ran the wires from the two prongs on the TKO-600 to the factory pigtail (using spade connectors) for the reverse lights. Doesn't matter the orientation, the transmission just switches the lights on and off. I think the reverse light pigtail is the plug on the right side of the switch. (I used speaker wire because it was two wires stuck together and I don't care about looks)