Looking for a replacement set of the plastic extension panels or bumper fillers for my 1975 Buick Riviera. I'm not exactly sure if either of those describe them adequately but these are the the pieces that fill between the bumper and rear quarter. Thanks
Google 1975 Riviera bumpers fillers. Take your pick from the list that comes up. None of them fit without some work. Tom
No first hand knowledge or even a recommendation for these guys, just a link someone sent me a long ago (back when i had a 75) http://www.replica-plastics.com/EditParts.aspx?Make=Buick [TABLE] <tbody>[TR] [/TR] [TR] [TD][/TD] [TD][/TD] [TD]1974 - 76 Buick Riviera [/TD] [TD]BV 74 RCF Rear Center Filler[/TD] [TD]$99.00*[/TD] [TD]<center> [SIZE=1pt]add to cart[/SIZE]</center>[/TD] [/TR] [TR="bgcolor: WhiteSmoke"] [TD][/TD] [TD][/TD] [TD][/TD] [TD]BV 74 RRT Rear Right Extension T/L[/TD] [TD]$79.00*[/TD] [TD]<center> [SIZE=1pt]add to cart[/SIZE]</center>[/TD] [/TR] [TR] [TD][/TD] [TD][/TD] [TD][/TD] [TD]BV 74 RLT Rear Left Extension T/L[/TD] [TD]$79.00*[/TD] [/TR] </tbody>[/TABLE]
Thank you for the info. I did come across that on the net as well, but I was a little hesitant due to the quality of the images they had posted. It might be the only viable option if all the originals have been cleared.
Have a complete set original fillers, but shipping will cost a fortune (especially the rear center piece, due to length)
Here is a picture of the rear. The center filler panel is in good shape with the exception of some bondo that was used to connect the rear sides with the center. I figure if I'm delicate with it I should be able to remove the bondo and utilize the center. It is hard to tell from this picture but the sides are in bad condition and will need replaced. Would you consider splitting the sides from the original center section?
