Removed the upper and lower control arms and these are the shim packs. Is it normal to have this many and varying thicknesses? And can't seem to source replacement bolts for the upper control arm mount, OPGI has the lower arm mount bolts...
That looks like a normal shim pack to me, given the variability of our frames. If you wanted a more modern alignment with positive caster and a slight negative camber, the shims would possibly be thicker with stock arms. As for new bolts, I got nothing but you should ask Todd at Stage1Restoration.
As long as the alignment numbers on the screen are what you want, there is no right or wrong amount of shims. https://www.inlinetube.com/products...MI9KTQwI3FhAMVo2pHAR1c1ADoEAQYAiABEgIZXfD_BwE