Top problem

Discussion in 'The ragtop shop' started by fc61, Feb 1, 2015.

  1. fc61

    fc61 Member

    Hi
    Just cut my top running it down :( Looks like the fabric folds in between the bow and one of the brackets...
    Anybody seen this before ? or have an idea what causes it ?
     

    Attached Files:

  2. mrolds69

    mrolds69 "The Cure"

    I think your top pads are missing, or not positioned right.
     
  3. dynaflow

    dynaflow shiftless...

    ...common A-body issue. Unlike newer verts, you can't just unlatch and lower top into well (well, you can, but...). Per Owner's Manual, lower about 2/3, then gently pull top/padding from between bows before lowering rest of way. Bows want to be stacked on each other, not top material/padding. On plus side, boot goes on easily...
     
  4. fc61

    fc61 Member

    I ran it down a few times like that... adjusting the inner padding , then it`s not a problem. To bad i didn`t see it before it tor the outer skin
    Haven`t tried the boot yet.. First ragtop i own :)
     
  5. Mr. Sunset

    Mr. Sunset Platinum Level Contributor

    Thats called a "learning experience". sorry. those are never good
     

Share This Page