1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

Tilt steering disassembly????

Discussion in 'Classic Buicks' started by cobravii, Jul 14, 2015.

  1. cobravii

    cobravii Well-Known Member

    Hi Guys,

    I have a 1964 Buick Electra with tilt steering. The next step in my project is to restore the steering column. I've got most of it torn apart but I'm stumped on the next step. I cannot figure out how to get the tilt apart.

    Does anyone have directions on early sixties tilt steering column dis assembly? The manual doesn't seem to be any help.

    Here is a pic of where I'm at....
     

    Attached Files:

  2. schlepcar

    schlepcar Gold Level Contributor

    The two pins (one on each side) that are threaded on the inside are pressed in place. A small dent puller will remove them if you do not have the correct tool. Dan
     
  3. cobravii

    cobravii Well-Known Member

    I kinda thought that but it's good to hear confirmation. Is it pretty much self explanatory after that or is there anything I should know?
     
  4. schlepcar

    schlepcar Gold Level Contributor

    It is going to have some spring pressure on it,so work them out slowly and hold it with one hand while taking it apart. It is not real heavy on the spring,but you want to keep from losing pieces when it comes apart. Work in a clean area in case you drop something.
     
  5. cobravii

    cobravii Well-Known Member

    Good to know. Makes me wonder about reassembly? Is it rocket science?
     

Share This Page