okay i have an early 60's borgwarner big spline, and i have a throwout bearing from napa..part # N1488 http://www.napaautoparts.com/Master...N1488&Description=Clutch+Release+Bearing+Assy it won't fit over the input shaft of the transmission..what can i use?? anyone know? anyone have this problem before?..im using a stock bbb clutch fork.. thx
If you can give some more information we may be able to suggest, but this sounds like a trial and error kind of thing, what is the dimensions of the conflicting parts. Is this a GM transmission application? Then I think I would start with its original T.O. bearing and see how it fits your fork. If a non GM trans then either the trans T.O. wil lhave to be modified or the one that fits the fork will need modifiying. Or trial and error the parts shelf armed with the dimensions you need. Good Luck. Sounds like a hydraulic application may be best suited
Be careful because the application charts are often wrong, but if U go to Summitracing.com, they give the diameter of that shaft in there catalog, U can look at all the possibilities there -- With Best Regards Ross