I put a '70 buick 350 into my '84 regal and the bracket that holds the throttle cable doesn't mount to the intake. the original 350 bracket is wrong and the regal one is wrong also. Is there a car I can get the bracket off of or do I need to fabricate this?
I'm using a 307 Olds bracket, spaced up by about one 7/16" nut, to run my Buick 455 in my '83 Regal T-type. The Olds bracket mounts over the rear carb studs rather than requiring separate mounting spots.
i used the same tyrpe of bracket from 305/200r4 montecarlo trans dapt also makes the same bracket for q-jet with overdrive trans can get from summit racing. or modify old one.