I have a TA 286-08H cam that was installed in a motor and then removed, never ran. So, technically it's not new, but it's unused. $200 plus shipping. Thanks Brent I copied this from the TA website: Slightly larger than the TA 413. Good bracket cam but still streetable. Strong mid-range, top end power. TA roller rockers and valve springs recommended. 2500 -3000 stall converter recommended. Fair idle. 9.5:1 or more CR Idle Quality: Smooth Idle - just like stock Good Idle - mild lump, but doesn’t impair driveability Moderate Idle - nice performance sound Fair Idle - heavy lump Rough Idle - very lumpy race type idle VALVE LIFT STOCK 1.55 RATIO: IN: .500” EXH: .504” TA ROLLERS 1.60 RATIO: IN: .516” EXH: .520” DURATION AT .050 IN: 234 EXH: 248 ADVERTISED IN: 286 EXH: 308 LOBE CENTER: 112 POWER RANGE: 2000-6000