Somethings not right with my throttle linkage?

Discussion in 'Wrenchin' Secrets' started by hwtc2002, May 27, 2005.

  1. hwtc2002

    hwtc2002 Well-Known Member

    [​IMG]

    The butterfly on the choke stays open, and flops around, It's not in very good contact in the circled section. It can't close, and I have noticed alot of stalling while slowing down, unless you give it some gas. It's not engaging with the choke.

    It's a 2 barrel rochester in a 67 Buick Skylark 7037034 is the number on the traingular tag.

    Anybody have a picture of what this should look like? Or any suggestions?

    Thanks!

    Devin
     
    hwtc2002, May 27, 2005
    #1
  2. projectman

    projectman Well-Known Member

    I'll put up a pic of mine tomorrow, if you want something to compare it to.
     
    projectman, May 27, 2005
    #2
  3. hwtc2002

    hwtc2002 Well-Known Member

    That would be great! Thanks!

    I guess I should of put this under the carburater forum, I'm new here, sorry :error:
     
    hwtc2002, May 27, 2005
    #3
  4. r0ckstarr

    r0ckstarr Well-Known Member

    Bad choke pull off? (or whatever its called)
     
    r0ckstarr, May 28, 2005
    #4
  5. projectman

    projectman Well-Known Member

    judging by my pic, this might not do you much good.
     

    Attached Files:

    projectman, May 28, 2005
    #5
  6. hwtc2002

    hwtc2002 Well-Known Member

    Thanks for the pic! :beer

    Somebody told me it could be the kick down?

    But I'll have to see what the mechanic down the street says. He's got all the certificates in this field, and I don't need to pretend I know what I'm doing, and mess it up. :laugh:
     
    hwtc2002, May 29, 2005
    #6

Share This Page