1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

sell or trade SP1 for Offy 2x4

Discussion in 'Parts for sale' started by dpcp66, May 31, 2009.

  1. dpcp66

    dpcp66 Well-Known Member

    We have a SP1 intake that was bolt on and made 2 runs with it and put the b4b back on it. I would like to trade it for a 2x4 offy intake. the intake loks almost new so if your interested call (209)535-6968 ask 4 Doug

    thanks Doug
     
  2. dpcp66

    dpcp66 Well-Known Member

    i want to trade for an offy 2x4 barrol carb intake
     
  3. dpcp66

    dpcp66 Well-Known Member

  4. dpcp66

    dpcp66 Well-Known Member

  5. austrian455

    austrian455 6.56 $/gal...still 455

    I have a NOS Offy Dual Quad.
    It´s a original vintage parts.
    Never used, never bolted on. Still with the orig. tag on it.
    If you want I can offer 2 rebuilt Holley 600´s with it.

    Did you do any mods to the intake? Porting?
    Which flange type is it? Spread Bore?
     
  6. dpcp66

    dpcp66 Well-Known Member

  7. dpcp66

    dpcp66 Well-Known Member

    it is a square bore. you still interested in tyrading???
     
  8. austrian455

    austrian455 6.56 $/gal...still 455

    I´m still interested.
    If you want I can take some pics of the Offy.

    I will call TA Performance to ask if I can machine the square bore to accept the spread bore. I want to use the Q-jet in any way.
     
  9. dpcp66

    dpcp66 Well-Known Member

    just let me know
    Doug
     
  10. dpcp66

    dpcp66 Well-Known Member

  11. RAMKAT2

    RAMKAT2 Randy

    Doug, what is your price to sell the SP-1 without a trade?
     
  12. Andy Tantes

    Andy Tantes Silver Level contributor

    pm sent
     

    Attached Files:

  13. dpcp66

    dpcp66 Well-Known Member

    Randy I would take $300 plus shipping for it. Iys like new

    Doug
     
  14. austrian455

    austrian455 6.56 $/gal...still 455

    Sorry that I didn´t answer so long.
    But I´m out. Sorry.
     

Share This Page