What do i torque the roller rocker shafts to on an aluminum stage 1 head?also on the intake manifold is 30 ft. lbs.good?and i assume the only place to use never seize is on the exhaust bolts and the spark plugs?none on the intake to head bolts right? Thank you
Its my personal opinion to put anti-seize on any bolt that goes into aluminum threads. Otherwise the steel bolt will gall, and could pull the threads out of the aluminum. Of course any and all bolts associated with exhaust temp. should be coated with anti-seize also.:TU:
even on the roller rocker studs?would u happen to know what to torque them too on an alum.head? Thanks
I'm sorry George, no I don't I'm going to pass this one to someone else.. If nothing else, call TA tommorrow. o No:
