Pump seals

Discussion in 'The ragtop shop' started by 83Stage1, Dec 29, 2005.

  1. 83Stage1

    83Stage1 Well-Known Member

    Does anyone have info on a seal or seal kit for the top pump? Mine appears to be leaking between the resevoir tank and the pump body.

    Thanks
     
  2. GStage1

    GStage1 Always looking for parts!

    www.hydroe.com

    or visit a local hydraulic shop to match up your old seals for new ones.
     
  3. 83Stage1

    83Stage1 Well-Known Member

  4. 73rx3

    73rx3 Well-Known Member

    lift cylinders

    Hi,

    hydro electric is cheaper.
    i just bought 2 for my 67. they were $135.00 a piece.
    i have one from a 68 skylark. it was an extra. if you can use it,you pay shipping

    on ebay tamaz has them for $105.00 a piece, but they don't have them in stock.
    you have to wait a few weeks. Michael
     
  5. 83Stage1

    83Stage1 Well-Known Member


    I don't need the cylinders, just the seals in the pump... at this point. I'm hoping my cylinders will be ok. Thanks for the offer though.

    The "restoration" seal kit I bought for the pump was $22. It included two new resevoir seals, new o-rings for the pump shaft and fluid lines, new check balls, new mounting feet and a resevoir plug. I put the seal kit in this afternoon. I knew the resevoir seal was leaking. I didn't know the pump shaft seal was too. Glad we took it all the way down.
     

Share This Page