Hi, Where can I get power seat drive cables. I have the power bench seat from a 66 Toronado, the brackets and motor will bolt into my 67 LeSabre seat, but the cables are to short. Thanks Bruce
Did the car have a 60/40 front bench set-up????? If it was a regular bench seat...the width should be the same
Hi George, The Toronado had Strato Bench seat, the LeSabre has a full bench seat. I tried just hooking the power seat assembly together on the bench, stretching the brackets as far apart as possible and am about 1/2" short of the LeSaber distance. This doesn't allow for the offset between the motor and brackets when installed. (cables not in a straight line) Thanks Bruce
Local yard got in a 70 CoupeDeVille.....I am heading there now....if it has a p.bench set-up I will get the cables from it. I will let you know.
The Cad had a later model seat in it so....no luck. Will keep an eye open should something appear that will work for you.
Bruce, Check Ebay, (gm power seat cables), there's a seller who has about 25 of them in all different sizes, most of them are only $10.00. Steve
A speedometer shop was able to make cables for me, since power seat cables are the same as speedo cables, except for the length of course.