Poston GS 114 cam

Poston GS114 cam for Buick 350, never used - in box - only opened to check it out. Brother bought this for me last year when I decided I was going to tear down the engine and do a rebuild, never got around to it and in hard times this beauty must go! I have the box of lifters with it too if you need them, I just have to find them somewhere. I'm asking for 100$ for the cam alone, 120 for both cam and lifters. E mail me if you want pictures, rsmast3r@gmail.com

shipping from Gainesville, Florida, 32641.

Thanks,

Michael.

 

Hey Michael,

I may be interested. Do you have the cam card? I may have tossed my old Poston catalog since they folded.

 

#2 . i have a poston catalog here , will post info for ya shortly if thats ok . del

 

Please do, I lost it a while back, I do know it's a small mild cam.

 

TAH DAA !!! here ya go . from 2006 poston catalog :
cam - hydraulic
lobe center - 114
duration - 270/276
lift - 480/485
power range - 1500-5800
max rpm - 7000
and it says :
our best selling street/strip cam . notched pistons not req'd . 30 HP over oem gs cam . good low end , good idle , slight lope . works well stock or mildly modified . stock valvetrain ok but mods will work better . good gas mileage . 3:23 or better gears recommended .

 

I'll take this if Del passes?

Id be interested in cam and lifters (lifters are new?)

let me know, thanks.

edit oops I meant Joe...

 

Email sent.

 

Thanks Del! Annnnddd.... The lifters aren't "new" they're as old as the cam, bought the same time, from poston, they're the Hi-Rev lifters.

 

For what it's worth I ran this same cam in my sbb powered 65 Skylark conv.
with stock valve train. It is an excellent street cam. Also had 3.42 gears.

Bob H.

 

yep , waitin on joe . mini bump for ya - and - ken , goin to the valley this coming weekend ? just something we talked about before . will Pm ya too in case ya don't catch this . del

 

I'm going to pass on this one guys.

Best Wishes,

 

thinkin . pics ? can e-mail me at deadmanscurve@stny.rr.com or post here is ok if easier . thanks . no rush . del

 

Alright guys, I have some bad news, I went to go take pictures of it last night and I noticed the cam had begun to rust on the surface where the bearings go over, I don't however believe it will cause a problem at all once sanded off, but, to be honest, I dont want to risk selling it to anyone unless I get it fixed at my machine shop locally, so once he clears it, I will put it back up here and give del, and the other guy (forgot name) a PM letting them know it's up for sale again.

Thanks and sorry for an inconvience.

 

fair enough mike - just give me and ken a heads up with whatever info ya find out . no rush on my end . thanks . del