Poston cast aluminum valve covers for 350 Buick. Unused, never mounted to a head. Black factory finish, smoothed out the grinding off of the fins and BUICK lettering (factory ground off the black on the raised parts of the design but was a very coarse grind; I smoothed that up a good bit.) Some usual casting voids show on a couple of the fins. This wont bother most people unless you are going for Concours quality in everything. These have not been drilled for fill or breather. Located in Maryland. $125 shipped to lower 48 states. Click on pics for enlargement.
Hmm, I will consider these. I have bought a pair of roller rockers for my 350 and might need these for clearence. Do you have oppertunity for having the holes drilled? Jan
I measured the mounting surface to the inside of the top, and if I recall correctly, the measurement was about 7 cm tall inside. I dont really have the appropriate drill bit/hole saw to do this job for someone else's use. If they were going on my motor, I would probably be OK with doing it, but I dont want to wreck them if they are going to someone else.
BuickGSrules, you're up. Let me know if you want these and I'll see about shipping costs. Jay3000 on deck
