Parting out a 1965, 66 and 69 Skylarks

Discussion in 'Car Part-Outs' started by kburras, Mar 12, 2013.

  1. Inherited GS

    Inherited GS Well-Known Member

  2. kburras

    kburras Well-Known Member

    No problem. Kimberly:):):):)
     
  3. flyingjunebugs

    flyingjunebugs Silver Level contributor

    Hi,
    Interested in the 69 grill.
    Looking for disk front brake setup if the 69 has them.
    Bruce
     
  4. kburras

    kburras Well-Known Member


    Morning Bruce, The car didn't have a grille and it came with drum brakes. Thanks and have a great Sunday!! Kimberly:)
     
  5. flyingjunebugs

    flyingjunebugs Silver Level contributor

    Thanks for the reply!
     
  6. kburras

    kburras Well-Known Member

    Your welcome
     
  7. 36racin

    36racin Platinum Level Contributor

    Kimberly can you get me a bottom shot of that quarter? Inside and out. Looks rotten? That would be the passanger rear quarter.

    Thanks, Todd
     
  8. kburras

    kburras Well-Known Member

    Todd, I will get them this evening and post them for you. Kimberly
     
  9. bobslark

    bobslark bobslark

    looking for a set of rear wheel well moldings for a 69 skylark.i need the short ones.
    i started another thread with my contact info.
    lmk.
    bob
     
  10. kburras

    kburras Well-Known Member

    Here are the pics. The previous owner had already cut out the bottom of the quarter to replace.
     
  11. kburras

    kburras Well-Known Member

    Parts 005.jpg Parts 006.jpg Thanks, Kimberly :)
     
  12. kburras

    kburras Well-Known Member

    Parts 005.jpg Parts 006.jpg Todd the previous owner had already cut out the bottom of the quarter. Kimberly
     
  13. wheelz

    wheelz 'B' is for Buick.

    Hey Kimberly... maybe a long shot but...I need the RUBBER BUSHING, the glovebox door ARM slides into the dash...I would think your 68-72 cars have this... I need at least ONE good one... Removable with a hairdryer, heat it up to soften, then carefully pry to remove.. MOST of the time they crack.. Lemono if you can help!

    Wheelz, Tampa Bay
     
  14. kburras

    kburras Well-Known Member

    I'll check this evening and get back to you. Thanks, Kimberly :)
     
  15. 36racin

    36racin Platinum Level Contributor

    Kimberly,
    How would you cut that quarter if I wanted it? What would you want for it. I really only need to the center or maybe the front of the wheel well. Not the full quarter to the door sill. I will show a body guy what you have and let him decide if its useable. My quarter is good at the bottom except one small spot. I have side impact damage, rear is not crunched in towards front of the car. He may be able to patch in the bad of mine to what you have there.

    66 Buick GS 003.jpg
     
  16. kburras

    kburras Well-Known Member

    My husband is also a body guy and I will show him the pic this evening when he gets home from the shop and get back to you. Thanks, Kimberly:)
     
  17. wheelz

    wheelz 'B' is for Buick.

    Hi Kim? Kimberly? ... any chance you took a look at that glovebox rubber grommet? If so, canya send me a pix please? PenWheelz2@ij.net ThanQ! :TU:
     
  18. kburras

    kburras Well-Known Member

    I sure did and unfortunately all of them were dry rotted and crumbly. sorry I couldn't of helped. Kimberly
     
  19. wheelz

    wheelz 'B' is for Buick.

    ALL OF UM?? :shock: hmm.. Shame. I am not familiar with those things crumbling here in the south... drying out? - yes!....but. oh well.. ThanX anyway. The search continues.
     
  20. kburras

    kburras Well-Known Member

    Your welcome. Good luck on your search.
     

Share This Page