1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

NEED a --fuel cell and nos fogger system

Discussion in 'Parts wanted' started by speedking, Feb 8, 2013.

  1. speedking

    speedking Active Member

    I got a 70 stage 2 455 motor! lookin for a fuel cell that will fit in my Transam and I would like to find a NOS fogger system for my 455 if someone wants to sell there system, to up grade!!!
    Thanks Tim-
     
  2. JOE RIV 1

    JOE RIV 1 Well-Known Member

    I Have a new nos remote bottle opener for sale
     
  3. speedking

    speedking Active Member

    lookin for hole system! nos bottle opener?? is this a silonoid of sum sort?
     
  4. Heavy D

    Heavy D Well-Known Member

    you better get some oil dry and a plastic tub to throw your crankshaft in after you drive over it....... :laugh: :pp
     
  5. JOE RIV 1

    JOE RIV 1 Well-Known Member

    it will open the nos bottle by a switch no need to open by hand
     
  6. Cellguy

    Cellguy 86 Somerset Screamer

    Tim,
    I have a NOS pro fogger system that is new but open package. So let me get all the parts together and part numbers I'll post them.. I know I'm missing a 1 fogger nozzle for sure..
     
  7. Cellguy

    Cellguy 86 Somerset Screamer

    Tim,
    I collected all the pieces and checked it against the parts list from the directions. Here's the kit http://www.jegs.com/i/NOS/741/02462/10002/-1
    I also have NOS blow down tube ($30.00) NOS purge valve ($125.00) and Aerospace componants dual NOS bottle holder in billet aluminum ($200)
    Now here's what I'm missing:

    2 pro foggers nozzles part # 13700BNOS (jegs or summit 36-43 dollars each)
    fuel and nitrous jets ( jegs or summit price on how much HP you want)
    arming switch (any auto store)
    30 amp NOS relay (jegs 42.00)

    Priced to sell $675.00 plus shipping money order only
     
  8. speedking

    speedking Active Member

    I'm running rite at 800hp now, lookin for 1000hp with the nos. This is the kit I was realy wanting and lookin for!! Let me dig up sum money real quick an I'll get rite back to you! Thanks! Is the piping and wiring Instructions with the kit??

    ---------- Post added at 10:26 PM ---------- Previous post was at 10:10 PM ----------


    Not a street car!! drag car only!! It will hold together! At least the builder says it will LOL!!
    More worried about the rear end staying together!! want to put a 4 link in it and a new 9in but not rich yet! takes time an lots of money
     
  9. Chris Cornett

    Chris Cornett Well-Known Member

    Who's your builder! Good luck keeping a stock block alive with that power.
     
  10. Cellguy

    Cellguy 86 Somerset Screamer

    Tim,
    Yes I have the directions they have the wiring diagram. I have the piping.. The kit is only missing what I posted.
    Thanks
     
  11. speedking

    speedking Active Member

    Knoxville Rod and Bearing built It for me! That's what girdles are for! You can learn a lot on this site! Lots of good Info and lots of buick nuts! Love this site!!
     
  12. Chris Cornett

    Chris Cornett Well-Known Member

    I know all about girdles. We have a 750 hp girdled stock block and will never throw any more power at it. Good luck with your project but bring a big dust pan with you.
     
  13. Tuna

    Tuna Platinum Level Contributor

    Did you mean, that's what engine diapers are for? Good luck Bro!
    Tuna
     
  14. speedking

    speedking Active Member


    Sorry I found a NOS system here in Knoxville for 225.00! It's only a 100 shot and should be easy'r on my motor ! Alot of people here dont think my motor will stay together with that much NOS! Hate to take, that much of a chance!!!
     

Share This Page