1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

Need '66-'67 GM A Body Plain Steel Wheels, '66 Chevelle Radiator

Discussion in 'The "Other" Bench' started by bulletpruf, Jan 16, 2011.

  1. bulletpruf

    bulletpruf Member

    Fellas -

    Looking for a few parts that have proven to be difficult to find for my 66 SS396 Chevelle and thought I'd ask for help here. Specifically, I am in need of a '66 or '67 Chevelle big block radiator (stock, not aftermarket). Looking for the rad with the finger guard on top tank, but will also go with the HD cooling radiator. Will also purchase a trashed radiator if the tanks are good or if it has the finger guard. If you have one and not sure what it is, let me know and we'll figure it out.

    Also need plain 14 x 6 steel wheels from '66 or '67. The 6" wheels came on a lot of different cars - GTO, Chevelle SS, 442, GS, Lemans, Skylark, and Cutlass with HD suspension, etc. These are the wheels that you would have run dog dish hubcaps on. Hard to find these days because they were always replaced with aftermarket stuff. Markings on the wheel - "A3" by the valve stem. "GM" and "65" on the dimples by the lug nut holes. Markings may differ depending on application, but should be close to this. Also, 14 x 5 wheel markings are similar, but I'm not interested in these. FYI - a 6" wheel will measure 7" from outside to outside, and, of course, 6" where the tire bead sits inside the wheel.

    If you have other '66 Chevelle parts, let me know, because I probably need them for my resto.

    Please e mail if you have any of these or know where I can find them - sd_walters@hotmail.com

    Thanks,

    Scott
     

Share This Page