1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

My stainless resonators came today......are you kidding me?

Discussion in 'Repro Parts' started by nailheadina67, Jun 14, 2004.

  1. nailheadina67

    nailheadina67 Official Nailheader

    I would think when you pay a grand for a stainless system the quality would be better than this. The mufflers may come tomorrow, I'm afraid to look at them!:jd:

    Now I'm going to have to get fired up all over again........my son who can't even use tools could have done a better looking job than this. Am I on candid camera or something?
     

    Attached Files:

  2. nailheadina67

    nailheadina67 Official Nailheader

    Here's one of the pipes they sent me friday::puzzled:
     

    Attached Files:

  3. nailheadina67

    nailheadina67 Official Nailheader

    Looks like they needed a hammer to make them fit together.......:shock:
     

    Attached Files:

  4. Dale

    Dale Sweepspear

    Geez, maybe TA's system ain't so bad after all.

    What are those pieces welded on the ends?
    That's too bad Joe.

    PS.
    I do have an NOS resonator hanger.
    Can't remember if it's left or right.
    PM me if you are interested.
    I bought it off ebay thinking it was a different hanger. :Dou:
     
  5. nailheadina67

    nailheadina67 Official Nailheader

    And they call this a weld? Who do they got working there in Florida, migrant workers???

    [​IMG]
     

    Attached Files:

  6. GoldBoattail455

    GoldBoattail455 462 -> TH400 -> Posi

    Those arent welds! A good, acceptable weld is supposed to look like a roll of dimes on top of each other. Does anyone see that there? I dont.

    I feel bad for you Joe. Sorry to hear that. I would go right back to them to see what the problem was. Good Luck.
     
  7. Leviathan

    Leviathan Inmate of the Month

    Umm, maybe post the name of these morons so we can avoid `em. That's unbelievably poor workmanship IMHO.
     
  8. nailheadina67

    nailheadina67 Official Nailheader

    Believe it or not, I found them in the Buick Bugle.........Kepich exhaust............I'm just waiting to see what the mufflers end up looking like..............these parts are a joke!:Dou:
     
  9. rex362

    rex362 paint clear and drive

    send them back....they must think its april 1st or something..

    thats lousy for big $$$ or any $ at all.....
     
  10. Ken Warner

    Ken Warner Stand-up Philosopher

    Hope you put them on a charge card. I'd be disputing that charge before it got any later in the day!

    regards
     
  11. TuBBeD

    TuBBeD Well-Known Member

    With the crappy weld quality, I'll be surprised they don't leak. I would be speaking to someone on the phone asap about this. For $1000 I would expect top-notch work, not amatuer work like that.
     
  12. LowRoad

    LowRoad New Member

    Holy F-in crap!!!:shock:
    Those look like some kids high school shop welding project.

    Good grief joe. I am sorry you're having to deal with all this. I know the feeling of being all pumped when the box arrives, opening it up and just being mortified.


    *makes mental note to avoid Kepich
     
  13. midnightcruiser

    midnightcruiser The Midnightcruiser

    Send them back with a dynamite in it!! What a pile of junk you've got there! I feel sorry for you.. :ball: :blast:
     
  14. Ken Mild

    Ken Mild King of 18 Year Resto's

    Oh my God Joe. :shock:

    I thought it was just that one dimple in your first post, but this is mind boggling.

    Did you get a price from Gardner Exhaust Systems first? I can't imagine they would charge you much more than what you paid for these pieces of crap.

    I feel your pain. I would be creating new a-holes for all involved as we speak if it were mine.

    What was the name of this company??? Inquiring minds not only want to know, they "need" to know so we don't have these crack heads make exhaust systems for anyone else. :Smarty:
     
  15. nailheadina67

    nailheadina67 Official Nailheader

    This was Kepich out of Florida. What's Gardners phone number?:Brow:
     
  16. nailheadina67

    nailheadina67 Official Nailheader

    I found their phone number and called.........they don't make Riv exhaust systems.:rolleyes:

    I then explained to him that there is a good market for them since nobody makes them anymore. Right now if I had the money to invest I would just make the darned things myself and be the first to offer them.:af:
     
  17. TA Performance has a system...

    Click here.
    $415 and mandrel bent.
     
  18. Evans Ward

    Evans Ward Well-Known Member

    I kept reading waiting to see that you found and discovered the hidden cameras! Sorry and sad to see that this wasn't a joke. I've never welded but I sure know a good and acceptable weld from a shoddy and unacceptable one! I'll bet I might could come that close myself. I would call the vendor back and demand a full money back refund. Not only are the weld horrendous, but crimping the pipes like they did is also totally unacceptable. Really sorry for you and hope your situtation has a good outcome and peaceful resolution!
     
  19. nailheadina67

    nailheadina67 Official Nailheader

    Re: TA Performance has a system...

    They don't offer a stock replacement system, and they also don't supply the '66 front pipes that I would need to fit my Nailhead. I may have tried that if they did. :bglasses:
     
  20. MPRY1

    MPRY1 Gear Banger

    Those things are horrific looking. I swear I have seen better welds from beginer welding students. I would not have paid $50 for them let alone $1000. I'd stop payment ASAP, send them back and make sure you warn as many Riv owners as you can to steer clear of these hacks.
     

Share This Page