my dumb question of the day

Discussion in 'Race 400/430/455' started by Mike Miller, Jul 30, 2005.

  1. Mike Miller

    Mike Miller Well-Known Member

    What do you do with the hole for the kick down linkage on a race only TH350. Thanks for any help.

    Mike Miller
     
    Mike Miller, Jul 30, 2005
    #1
  2. fast-gs

    fast-gs what to do now?

    fill it with epoxy
     
    fast-gs, Jul 30, 2005
    #2
  3. BuickCityPsycho

    BuickCityPsycho TopFueL wannabe

    i tapped mine and put a pipe treaded plug in it
     
    BuickCityPsycho, Jul 30, 2005
    #3
  4. Mike Miller

    Mike Miller Well-Known Member

    Thanks. Since it is already in the car, i will try the epoxy route. Thanks again
     
    Mike Miller, Jul 31, 2005
    #4
  5. gymracer01

    gymracer01 Well-Known Member

    Plug

    I have used an old cable thet was junk and cut it off and filled it with RTV and let it dry overnight. Then install it with the stock seal and retaining bolt. This way if you ever decide to change the valve body back to a street setup you have not screwed up the trans case.
    Worked for me!
    JIm N.
     
    gymracer01, Jul 31, 2005
    #5

Share This Page