My 3/8" hard-line into -8 braided stainless steel fuel hose ADAPTER

Discussion in 'Wrenchin' Secrets' started by STAGE-2 TORQUE, May 20, 2010.

  1. STAGE-2 TORQUE

    STAGE-2 TORQUE STAGE-1 Buick "494Stroker" in 2021

    ...it took me 2-weeks with Summit and Jeg's ... NADA.

    Today (between 6-different plumbing shops, hardware stores, and auto part stores) ... I found what I needed to use the stock 1987 Regal fuel line (@ 2-1/2-inches from the gas tank) changing into -8 braided stainless steel hose.

    I am using this on my '87 Regal Special-T (Olds 307 SWAP for '73 Buick 455).

    Hope this helps someone ... like I needed it.:TU:
     

    Attached Files:

  2. Loyd

    Loyd Turbocharger junkie

    I use the following web site to identify the parts I need then order them from my local independent parts jobber who is a lot more resourceful than the chains

    http://www.anplumbing.com/

    Between the adapters and hose end columns there are a lots of choices.

    Hope this helps
     

Share This Page