moroso trick spring

Discussion in 'The whoa and the sway.' started by Whitedrifter, Jan 15, 2013.

  1. Whitedrifter

    Whitedrifter Well-Known Member

    I have a 78 nova with a 455 and I don't have a scale to weight my front end
    My question is wich one to use??
    You have One is max 2,100 lbs and min 2,010 lbs
    second is max 1.970 lbs and min 1,910 lbs
    third is max 1.910 lbs and min 1,940 lbs
    if you want any other spec of my engine look at my signature
    thanks
     
  2. TheSilverBuick

    TheSilverBuick In the Middle of No Where

    Do you have any reference specification what is stock for your Nova with a Chevy 350 and A/C? That's the set I put in my car and I would personally like a bit more spring in it as the exhaust and scatter shield tag things from time to time and any taller of a tire in the front will rub the fenderwell over bumps.

    ---------- Post added at 09:43 AM ---------- Previous post was at 09:29 AM ----------

    Slight hi-jack.

    Have you ran your car at the track yet? I'm running the roller version of that cam and 3.42 rear gears. I'm running a 5 speed though and 2.5" exhaust and a few other slight variations. For reference my car weighed in at 3,650 lbs with A/C, full tank of gas and full interior minus half the carpet, the head liner and a few plastic trim pieces.
     
  3. Whitedrifter

    Whitedrifter Well-Known Member

    the car lauch very well
    what do you think of 90/10 drag shock front and 50/50 rear
    the engine will change for the next summer
    I go with a ez-efi system (wait for the next system)
    wiseco piston and 3.73 rear end
    and I need some advice for the cam
     

Share This Page