1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

Mopar 440 intake port match

Discussion in 'Race 400/430/455' started by hugger, Mar 13, 2017.

  1. hugger

    hugger Well-Known Member

    Do any you fellas have any pics of a 440 intake port matched up to the Buick ports, I'm getting ready to start fitting my intake and looks like I'm going to have some real estate shortages in a few areas
     
  2. Stevem

    Stevem Well-Known Member

    The last time I saw this done I think I recall a mid adapter was made up to get the transition cleaner.
     
  3. hugger

    hugger Well-Known Member

    rps20170401_182025.jpg
    Decided after much deliberation that the Mopar port spacing just isn't close enough IMO to make work like it should, IE a clean straight shot down the runner so this is what's left of the Mopar Edelbrock Pro Flo intake......sucks to cut up $425 for just the runners but that's hot rodding...
     
    Last edited: Apr 1, 2017
    Max Damage likes this.
  4. hugger

    hugger Well-Known Member

    Cant Wait to show you fellas what I got brewing for the intake....
     
  5. hugger

    hugger Well-Known Member

  6. Stampy

    Stampy Well-Known Member

    Tunnel ram! Looking good. What's the carburetor situation going to be?
     
  7. JOE RIV 1

    JOE RIV 1 Well-Known Member

    looking good i like the empty bottle of jack on the shelf!!!
     
  8. hugger

    hugger Well-Known Member

    No carbs, forward facing throttle body, hope to have the intake all welded up in a week or so, friend of mine is cutting the top panels out today
     
    GS Kubisch likes this.
  9. gymracer01

    gymracer01 Well-Known Member

    Have use B (383) intake on Stage 1 heads with Charlie Evans adaptors.

    Jim N.
     
  10. D-Con

    D-Con Kills Rats and Mice

    Did you get this intake completed? Wondering if you dropped it favor of the blower setup.
     
  11. hugger

    hugger Well-Known Member

    Its 90% finished
     
    Max Damage likes this.
  12. hugger

    hugger Well-Known Member

  13. sean Buick 76

    sean Buick 76 Buick Nut

    Looking good!
     
  14. HotRodRivi

    HotRodRivi Tomahawks sighted overseas

    Anything new on this? How large will the hood scoop be?
     
    patwhac likes this.
  15. hugger

    hugger Well-Known Member

    Everything was sold off,....except for the intake its a shop decoration now,...along with my 871 blower setup
     
  16. Bens99gtp

    Bens99gtp Well-Known Member

    There was a guy looking for a blower setup not too long ago
     
  17. HotRodRivi

    HotRodRivi Tomahawks sighted overseas

    Dam........negative waves dude.
    90 % ....
     

Share This Page