After lurking for probably about a year, seeing the same styles of questions re: " on my street motor how much do i want to take off the heads to get xx.x compression ratio?" or "my motor is stock, what is the valve stem height?" (I'm just winging these questions if you can't tell...) -- I've spent afew days putting together a site that will allow us to enter in specs for a general type of motor build and then have that info be able to be printed out and used as a "recipe" of sorts on a build. I admit to this being a self serving application, in that I have questions on tolerances, etc that I have to search high and low for. And, as we all know, building Buick motors is a risky endevour unless you are working with a known good Buick shop - a hit and miss proposition. If you have some interest in helping test, make constructive comments, put up with some possible connectivity issues, etc to help get the site up I'd be interested in hearing from you. questions, comments, etc always welcome thanks!
I've got a small flash demo of the site as it currently sits, its 230k so its too big to attach here (163k limit here). Email me if you'd like a copy.
