1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

lookin for a th400

Discussion in 'The "Juice Box"' started by 67skylarkGS, May 16, 2005.

  1. 67skylarkGS

    67skylarkGS Well-Known Member

    I just made an engine swap to a 455, and my th350 is hurtin because of it. Ill take a real jumkie one cause i got a buddy that will rebuild it for free. Let me know how much and where its at. Thanks.

    sinclair
     
  2. GStage1

    GStage1 Always looking for parts!

    You should be able to get one from any 1973-77 Pontiac Grand Prix models.
    They all had TH400 shortshaft as standard equipment.
     
  3. 1979SHX

    1979SHX derevaun seraun

    I have (4) B-O-P TH400s for sale. $50 for each of the first four below (which may need a rebuild); $150 for the full manual valve body.


    196? TH400 (from 1968 Bonneville) long tail shaft
    1968 TH400 (from 1968 GTO) short tail shaft, original from car, missing input shaft/clutch pack assbly, code PX
    1972 TH400 (from 1972 Catalina) long tail shaft, original from car
    1973 TH400 (from 1973 Grand Am) short tail shaft, code PT, original from car
    1973 TH400 (from 1973 Grand Ville) long tail shaft, B&M Transpack &
    ManualPak (full manual valve body), oil pan drain plug. Raced on circle track 2 seasons (1988-89) with Vega torque converter and Quicksilver shifter. Worked very well. (converter included; shifter not incl.)
     
    Last edited: May 27, 2005
  4. 67skylarkGS

    67skylarkGS Well-Known Member

    yea man, i am deffinatelyinterested in the TH400 shorttail out of the 68 GTO. 50 bucks sounds good, just let me know wut the shipping is, if its too much ill try and find someone closer. I dont need anything else except for the case, so as long as the case isnt cracked we are still in business. let me know wut the deal is witht he shipping, and ill get back to you.

    sinclair
     
  5. 1979SHX

    1979SHX derevaun seraun

    I'll get it out this weekend.

    If all you want is the case, I can pull the rest of it's guts out to make it lighter for shipping. I'd rather not do that without cash in hand, though.

    Let me know what you want to do.
     
  6. 67skylarkGS

    67skylarkGS Well-Known Member

    yeah, that sounds perfect. just let me know wut the cost of shipping is and ill cut you a check with in the next couple of days.

    thanks, Sinclair
     
  7. 1979SHX

    1979SHX derevaun seraun

    Sinclair,

    Sent you a PM.
     

Share This Page