1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

Kenne-Bell TH400 Switch Pitch trans and converter

Discussion in 'Parts for sale' started by Jim Hoke, Mar 2, 2021.

  1. Jim Hoke

    Jim Hoke Member

    41Speciman - are you able to help a courier offload at your address? I have another shipper who asked for help to load and unload. They have said that they have a liftgate - so maybe no forklift truck? Let me know and I'll get a price from them. Thanks - and again - sorry for the back and forth. Trying my best to make this work - but it's dang spendy to ship!
     
  2. Jim Hoke

    Jim Hoke Member

    Wow....... That would have made it a bit easier. Let me run this to ground with 41Specimen - and give it our best shot. I always go through the list from first to last - to honor the way people have responded. Nice to know you are here though. I really want this thing to go to a good home - as I think it is a pretty cool piece.
     
  3. 455 Powered

    455 Powered Well-Known Member

    I bought a transmission from board member and he used a couple inexpensive ratchet straps to tie it to the pallet. Worked great. Carolina to Illinois
     
  4. Jim Hoke

    Jim Hoke Member

    That’s my plan as well, to mount the converter, slip the yoke on, strap it to a pallet, bag us the extra bits and wrap it in plastic. Don’t have the pallet or plastic, but I’ll figure that out.
     
    455 Powered likes this.
  5. nicks65riv

    nicks65riv Member

    I understand. I'll be watching for the outcome.
    Nick
     
  6. 41speciman

    41speciman Well-Known Member

    Sorry running my business and yes I have forklift to off load
     
  7. 41speciman

    41speciman Well-Known Member

    Jim talked to fastenal they recieve shipments in Evens called 3pl so Im emailing someone here suggested now
     
  8. Jim Hoke

    Jim Hoke Member

    Sounds good. You tell me what I need to do and I'll get 'er done on my side.
     
  9. 41speciman

    41speciman Well-Known Member

    Never done this so learning how it works also
     
  10. Jim Weise

    Jim Weise EFI/DIS 482

    It's easy guys.. do Fastenal shipping all the time.

    Fastenal is a store to store shipping deal. It's so cheap because they are using your freight to fill trucks that are already going there. As such, there is no guarrantee on shipping times.. if there is room
    on the truck it goes, if not, it sits in the warehouse until the next truck.. the longest I have waited on cross country shipping is about two weeks.


    If you box up your parts, they will insure it if it's fully enclosed in wood.. or just ratchet strap it to a pallet and hope for the best.

    Then go online, and fill out the request form.. the buyer or the seller can do it.. does not matter, You get a quote back, and then follow the steps and fill out the forms to accept the quote. Then they transmit the paperwork to both shipping and receiving locations.

    The shipper then goes to the shipping store, where they will unload it with a forklift.

    Once the shipment gets to the receiving store, they call you and let you know it's ready for pickup.

    Both sender and receiver should bring ID with them.

    Either the sender or the receiver pays for it, you can just put it on your fastenal account if you have one.

    All there is to it.. they typically are 1/3 to 1/2 price of normal LTL shippers.

    JW
     
  11. Jim Hoke

    Jim Hoke Member

    Hey Jim, thanks for wading in and offering guidance. That was the first company that I checked (Fastenal) - per 41Specimen's suggestion. Their shipping cost was fair ($198 for 175lbs) - but the closest they could get to 41Specimen was Douglas, Wyoming (3.5 hrs. North). Due to COVID they are not shipping between their Eastern and Western zones - and they said that Tucson to Greeley, CO. fell into their Western to Eastern Zones. Go figure. 41Specimen is trying it from his side - and we should know today.
    Like your Lincoln quote by the way. Big fan of the tall Man.
     
  12. Jim Weise

    Jim Weise EFI/DIS 482

    Ya, I don't understand that silly east/west zone thing.. pain in the butt for me this winter, had to ship several things via LTL lines. More money, and I have to actually build a crate for them, as opposed to using my custom shipping crates, which fastenal will send back to me from anywhere in the country for 50-75 bucks.. the LTL lines want nearly as much to ship it empty, as to ship it full.

    With the deal you gave him on that setup, there is room for LTL from dock to door..

    JW
     
    Kingfish likes this.
  13. 41speciman

    41speciman Well-Known Member

    Thank you for the information but douglas is 3 hrs I could drive up for sure Im working on it still
     
  14. thebuick

    thebuick Well-Known Member

    in line
     
  15. 41speciman

    41speciman Well-Known Member

  16. Jim Hoke

    Jim Hoke Member

    Transmission and extras have been sold. Thanks for your interest!
     

Share This Page