Hairline crack at gasket face between cylinders 3 and 5. Is JB weld any good for this... o No: save a complete teardown/rebuild and weld/sleeving? :Brow: Motor is stock 72 Riv 455 GS (stage 1).
If it's a numbers matching type of deal and you want to save the block, you might be able to have the crack pinned. Just depends on how bad the crack is. A good welding shop should be able to repair it also.
Once had a block "numbers matching" pined. It worked successfully. The block must be heated then slowly cooled...a specialty shop would be advisable.