1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

HP1000 80513

Discussion in 'Holley' started by Canadian GS 350, Sep 8, 2022.

  1. Canadian GS 350

    Canadian GS 350 Well-Known Member

    Anyone know the part number for the rebuild kit for this carb? I want to use Holley or Quick fuel product.
    Thanks
     
  2. 73 Stage-1

    73 Stage-1 Dave

    Last edited: Sep 8, 2022
    Max Damage likes this.
  3. Canadian GS 350

    Canadian GS 350 Well-Known Member

  4. Canadian GS 350

    Canadian GS 350 Well-Known Member

    Spoke to the rep at Allstate carburetor, he claims they use Holley components. The needle and seat in his kit is the 0.120 viton. The AED kit uses 0.110 nylon
    So I’m happy with this kit. Thanks for the other option information.
     
  5. DEADMANSCURVE

    DEADMANSCURVE my first word : truck

    I was curious , looked up the carb in my Holley info .
    Yep needle and seat is .120 Viton tip , 84 jets front and rear , 6.5 power valves front and rear , front nozzle 31 , rear nozzle 36 , 30cc front pump , 50cc rear pump . Looked like rear jet extensions and notched float , dif booster style .
    Just some OEM spec info for ya in case someone else swapped out something .
    It was from 2005 catalog info but it's been pretty accurate for me .
     
  6. Canadian GS 350

    Canadian GS 350 Well-Known Member

    That’s one of the reasons I wanted to source Holley kit. Wanted the correct size components. Those specs are same info I have as well. The Allstate site has a lot of Holley parts and kits. If you don’t see what you need, call them. Prices seem good, and for $16 the kit was mailed to me here in Vancouver
     
  7. DEADMANSCURVE

    DEADMANSCURVE my first word : truck

    Allstate , down on long island ?
    I think I have gotten a couple small parts from him I needed to finish up something .
     
    CJay likes this.
  8. Canadian GS 350

    Canadian GS 350 Well-Known Member

    Yes, I believe so.
     
  9. Canadian GS 350

    Canadian GS 350 Well-Known Member

    Received a kit for the hp1000, the 850 double pumper, happy with both kits. Might add they sell all sorts of Holley parts, jets - $3.98 a pair !
     
  10. CJay

    CJay Supercar owner Staff Member

    Jim at Allstate is top notch. I've been using him for 30+ years. I told him he's not allowed to retire
     
    Max Damage likes this.
  11. Canadian GS 350

    Canadian GS 350 Well-Known Member

    I set the carb up stock on the primaries- 84 jets and 6.5 power valve. Secondary is power valve blocked, 92 jets all air bleeds stock set up 72066A21-D40C-46CD-AEF0-024AFDD150E7.jpeg
     

Share This Page