1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

How to save a thread on my PC?

Discussion in 'Tips On Using The Board' started by wkillgs, Jan 9, 2010.

  1. wkillgs

    wkillgs Gold Level Contributor

    How can I save a whole thread on my PC for viewing while offline?
    I'd like to be able to edit out unneeded posts to streamline the read.
    Can this be done without a knowledge of writing code?
    Thanks!

    P.S. I do routinely 'cut/paste' text and save as a word file. I'm looking to take that to the next level.
     
  2. tlivingd

    tlivingd BIG BLOCK, THE ANTI PRIUS

    Walt, try this.... go to "Thread tools" just above the top of the thread but not at the top of the page. and click on "show printable version"

    hopefully that's what your looking for.
     
  3. 1967GS340

    1967GS340 Well-Known Member

    If the view from the printable version works for you and you have Adobe PDF pro installed on the computer you can tell it to "print" to adobe and make a pdf out of it that you can archive with whatever name for the file that you want.
     
  4. wkillgs

    wkillgs Gold Level Contributor

    Thanks. But I'd like to edit the threads by removing irrelevant or bs posts when saving or printing.
     
  5. tlivingd

    tlivingd BIG BLOCK, THE ANTI PRIUS

    yea did that printer friendly version help? you may need to cut and paste after getting that version.
     
  6. ubushaus

    ubushaus Gold Level Contributor

    After you switch to "printable version", do "file" "save as" and save the file in ".txt" format. Then you can open it in Word and edit away!
     
  7. wkillgs

    wkillgs Gold Level Contributor

    That works fairly well.
    But ideally I'd like to save it in the same view as is on the screen.
    To do that is my only option to save and modify it using HTML code?
    I'll try the download sites and see if there is some sort of screen editor out there...
     
  8. ubushaus

    ubushaus Gold Level Contributor

    Well, I just tried to do a "save as" in IE8, and it tells me the file cannot be saved. Must be a site restriction.

    I guess the problem with copy and paste comes with multi-page threads. It will take a long time to copy, paste, and format a 10 page thread!

    Maybe there is a utility out there.
     
  9. Poppaluv

    Poppaluv I CALL WINNERS!!!

    Aaaaieeeeeeee, I'm being deleted.... :ball: ..."What are you doing Dave?" :pp
     
  10. wkillgs

    wkillgs Gold Level Contributor

    Dave? Dave's not here!:bla:
    :grin:
     

Share This Page