If so, please post it up in the cam card section. I have an older TA 118 cam on the shelf but TA cant provide a cam card for it cause they dont have cards for the older (15 years +?)version (which I guess were ground by Schnieder?)
Devon posted the specs in this thread, https://www.v8buick.com/index.php?threads/kenne-bell-c118-cam-timing-specs.193239/ I knew I saw it somewhere. It was post #2 in the Cam card sticky.
Thanks Larry - Thats spec on one of the KB versions, I've got one version of that cam in my 73 (card attached, and I'll also throw that in the cam sticky). Funny thing is, that cam is different from CorkGS's old 118, which is different from the one Devon refrences and some of those differences are significant (228/246 @ .050 vs. my 226/236 which honestly may be a human error on the card). That, and the timing events are all differnt on all three grinds. I suppose it really doesnt matter as long as you degree to get the intake close where you want it for your projected DCR, but it still would be nice to get a TA card of a similar era and be a little more sure of the rest of the grind...