GSX headlight door overspray

Discussion in 'Color is everything!' started by CJay, Jun 13, 2022.

  1. CJay

    CJay Supercar owner Staff Member

    How much overspray is correct for a GSX on the backside of the headlight doors?

    If anyone has a picture of an original headlight door please post them up..I. trying to figure out if the backsides of mine have been touched. There is literally zero yellow on the backs. Looks too nice as if the doors were masked off and the backsides painted black.
     
  2. bignastyGS

    bignastyGS Maggot pilot

    Mine...original.... 20220613_205057.jpg
     
  3. bignastyGS

    bignastyGS Maggot pilot

  4. CJay

    CJay Supercar owner Staff Member

    Yep....looks like these were touched up to make them look nicer :rolleyes:

    They were painted just where they show when the hood is up. The rest has the factory overspray. I'm going to have to address this somehow and try and duplicate the sloppiness of the factory.

    20220613_205513.jpg 20220613_205515.jpg 20220613_205526.jpg
     
  5. gsfred

    gsfred Founders Club Member

    NOS GSX doors over the counter were totally black, front and rear.
     
  6. CJay

    CJay Supercar owner Staff Member

    In examining the overspray pattern, it looks like they were on a table and sprayed from the top
     
    455 Powered likes this.
  7. Guy Parquette

    Guy Parquette Platinum Level Contributor

    that’s exactly how I took it from your pics. Hard to believe! I suppose to hit that back lip? Maybe hung somehow in a fixture?
     
  8. IDOXLR8

    IDOXLR8 Senior Member

    I can have apriecation for what your trying to accomplish, after doing a frame off restoration on a numbers matching 68 Corvette, but the question would be, are you having the car judged and is that something that would be looked at in judging or is personal satisfaction that you want it spot on, the it came from the factory, I admire both. I chose to lose points on the NCRS judging because I made things nicer then factory like what your up against, I chose to make it neat as far as overspray.
     
    Last edited by a moderator: Jul 17, 2022
  9. Max Damage

    Max Damage I'm working on it!

    I thought yours were good already? LOL.

    Find something that is actually wrong with your car, could you?
     
  10. IDOXLR8

    IDOXLR8 Senior Member

    I made a post as a reply and it blended into a quote, can't fix that. I always enjoy this hobby, when we have something nearby perfect the find was of getting sloppy on purpose, LOL!
     
  11. CJay

    CJay Supercar owner Staff Member

    Fixed it for you.....

    Im trying to make it as close to factory correct as possible. I did update my GSX thread with some before and after pics but I'll post a couple here too of the results.

    I carefully sanded off all the black paint that was applied, masked off only the affected area and sprayed it with Sem trim black. Then carefully misted saturn yellow in the same direction as the original painter did. Here are the results Al-

    20220712_153142.jpg

    20220712_153124.jpg

    And the before and after-

    20220712_155043.jpg

    20220713_160906.jpg
     
    Dano likes this.
  12. IDOXLR8

    IDOXLR8 Senior Member

    Thanks, look correct. I remember I was able to order those head light doors new at Miller Motors Buick in the 70s, yep, I'm old,LOL!
     
    Dano likes this.
  13. hugger

    hugger Well-Known Member

    If layed flat on a table when spraying the edges you would get that pattern
     

Share This Page