Found this tucked away in a corner at a local pick and pull.

Discussion in 'Junkyard Jewels' started by buicksWILD, May 23, 2021.

  1. buicksWILD

    buicksWILD Well-Known Member

    Was going to ask about it but lost track of time and left right at closing time pulling some odds and ends for my bird. I plan on going back sometimes this week for some more things if anybodys interested. The trunk is rotted through.

    20210518_141145.jpg 20210518_141202.jpg 20210518_141240.jpg 20210518_141223.jpg
  2. Dano

    Dano Platinum Level Contributor

    Guys always seem to be looking for core supports & RF inner fenders if good or even repairable. @NoVA_69_GS350 was recently. Any good sheetmetal/floors is worth saving and unless it's been all patched up it looks solid. @gscalifornia might be looking for a good quarter panel (don't recall which side).
  3. 69 GS 400

    69 GS 400 Well-Known Member

    Still good parts on that one. Getting extremely rare to find in wrecking yards nowadays. I would pull the front fenders. Definitely repairable even with some rust.
  4. thebuick

    thebuick Well-Known Member

    & pull the bumpers and grill surround and the rear end/trans , hell just have it towed to your house there is many good parts on that car.
  5. NoVA_69_GS350

    NoVA_69_GS350 Well-Known Member

    @Dano Thanks for the mention. @buicksWILD, how was the core support and pass. inner fender well? Any chance you picked them up? Like @Dano mentioned, I've been looking for a core support for what's going on a year now, they aren't easy to find.
    Dano likes this.
  6. Dano

    Dano Platinum Level Contributor

  7. Mike Trom

    Mike Trom Ugg

    Some small items I see, power window switches, vent window crank knobs, tail lights, even side glass may be worth something to someone with scratched glass, it may even be tinted since it has AC.
    Skylark door emblems (if not pitted). Problem is that the demand is not very high so you may have to sit on these things for a while.
    I don't need anything but may be interested in the master power window switch if it is not pitted.
  8. jaye

    jaye Well-Known Member

    If that was close to me I would like to have those bumpers

Share This Page