1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

Data acquisition system

Discussion in 'Race 400/430/455' started by Bens99gtp, Jan 2, 2021.

  1. Bens99gtp

    Bens99gtp Well-Known Member

    So I would like to put some 21st century equipment on my car to get more info on whats going on with my car during the passes.

    For now I'm thinking just the basic, but would really like to have driveshaft speed. But would like the ability to expand some

    What are others using/ have used. What are the goods and bads you have run across
     
  2. slimfromnz

    slimfromnz Kiwi Abroad

    I use Innovate Motorsports SSI-4 + their DLG-1. I log the following
    - Engine RPM
    - Throttle position
    - Fuel pressure
    - Driveshaft RPM (still figuring it out)
    - Drivers AFR
    - Pass AFR
     
  3. Bens99gtp

    Bens99gtp Well-Known Member

    So this isnt a stand alone system........it has to have a computer to record as you run???
     
  4. Jim Weise

    Jim Weise EFI/DIS 482

    I recommend the AEM Electronics AQ-1 system... Stand alone, CAN network to their gauges, digital and analog inputs, plus good software to analyze and store your runs.

    We installed the complete system and gauge package in Mike Erickson's car last year, and it worked well.

    JW
     
    Max Damage likes this.
  5. Bens99gtp

    Bens99gtp Well-Known Member

    I know the aim dyno shaft looks like a cool feature.....to be able to sctual read torque put to the track each pass would be awsome
     
  6. slimfromnz

    slimfromnz Kiwi Abroad

    Yes it is standalone. I also have a their Pocket Logger which records the data to an SD Card.
    I didnt want an LCD display in my car. This system is hidden away for me to analyze after each run. My car is quite basic in its look and I wanted to maintain that.
     
    Last edited: Jan 3, 2021
    Mart likes this.
  7. BP_Motorworks

    BP_Motorworks Ragtop Racer

    I have a RPM performance system. I have known Randy for a long time and be makes a good product. He even has a digital dash if you want your car to look like a 21st century race car.
     

Share This Page