cruise bracket wanted

brake lightswitch / cruise swtich bracket wanted

for my 72 skylark w/ 455
:shock: I need the bracket that holds the brake light switch and vacuum brake switch...
this bracket is by the brake pedal and it is different between cruise and non/cruise cars
also big car brackets won't work :ball:

I could also use the switches o No:

thanks in advance

well here's a pic :shock: :shock: :shock:

http://cgi.ebay.com/ebaymotors/ws/e...&item=4526957249&rd=1&sspagename=STRK:MEWA:IT

:3gears: :bglasses: :TU:

 

I think an Electra may be the same unit which may give you more options.

 

:shock: thanks for the tip Jim ........but there not the same :ball: :shock:

 

if 68 sportwagon is the same then i know of one.

 

You are right. I looked and many cruise parts are the same for all series but the bracket is 3000-4000 series specific. A 68 sportwagon is the same and should fit. It is GM#6465362.

 

:Brow: Bob let me know if you can get it and what you want for it :bglasses:
and a pic would help if possible :Brow:

thanks again Jim... for another tip :bglasses: :TU:

:3gears: Mark

 

the bracket I need is down by the brake pedal :Smarty:
but I could use the whole unit.... or just the the chain :Brow: how much uzzled: o No:

:bglasses: :TU:

 

I'll take it :Brow: PM me yor address and i'll send out a money order in a few days :TU:

 

can you send pix of those uzzled: o No:

 

Mark


I thought you wanted the throttle bracket too and the above info was based on that assumption. However you want the bracket down by the brake which is 1380103. Fortunately, the models it fits are the same and a 68 sportwagon should be a donor.

 

:shock: ttt :ball: no luck yet

 

every part I need costs a fortune!!!!!!!!!!!!!!

WELL GUY'S I FOUND ONE ON EBAY :rant: :shock: :eek2:

http://cgi.ebay.com/ebaymotors/ws/e...&item=4526957249&rd=1&sspagename=STRK:MEWA:IT

Well I really DO NOT want to pay 88.00 for a fricken bracket :shock: uzzled:

does anyone have this bracket o No: uzzled: I'll go half for one :rant:

I want to put cruise on my 72 skylark 455 but this bracket is holding me back :rant: :ball: :ball:

 

Heck I Just Built One It Is Under The Dash And No Can See It !!!

Ken

 

well I'm going to see how this ebay plays out :shock: and if any one here has one uzzled: o No:

Ive got a big car bracket and a non cruise bracket right in front of me
I've got a couple ideas :Brow:

 

How about this?

I have attached a picture of what I think your looking for?
This is from a GS/Skyark 70-72 with cruise control. The switches worked when took out. The bracket is good.
Still need it?
Make an intelligent offer $??.00 and I'll think on it. I would like to help you out.
Thanks;
Mike

 

well Mike I was going to go $40.00 for the one on ebay but...... I haven't bid yet :Brow:

so how's $40.00 sound for everything in the pic + shipping and can you send a few more pic's o No: uzzled:

It looks a little different from the pic in my 72 service manual..... might be from a 70 car o No: uzzled: I'd just bolt the hole thing right in :Brow:

thanks Mark :bglasses:

 

Alright...

Mark;
Here is another picture. It's not the greatest, but the best I could do with old technology.
If you send me a money order for $45.00 I'll ship it to ya like you see in the picture. Sound ok? Yes I believe it to be from a 70 or 71. I can't remember off hand.
Thank's;
Mike

 

Yes..... that looks more like it :bglasses: I'll take it :Brow:
PM me yor mailing info and I'll send you a money order next Thurs.

thanks Mark

:3gears: :TU: