Greg, i need the fitting that goes in the carb that the hard line from the filter bowl threads into.Two barrels might have the same part. Thanks and Peace WildBill
Carter carb but it may be the same on a Rochester. It is the fitting on the carb that the fuel line threads into. Hope you can help fellow Catman :TU: Peace WildBill
This is one off the carb I am rebuilding, I need to check my storage to make sure I have another one before I can offer it for sale. It is definitely not the same as a Rochester...
Bill, I checked my storage today and alas this is the only one I have, sorry. I could use a choke assembly for the same application. Greg, Is that timing cover, fuel pump and fuel line for sale? If so how much with shipping to AZ, 85281.
the timing cover has one bad hole on it let me know what you want to give on it all and it'll be yours shipping i would think to be around $10/$12 to you let me know Greg
Well, let's see...you asked what I want to give on it? I guess the simple answer is nothing. :grin: Is the bad hole one of the water pump holes? Can it be repaired? I also need a balacer, pulleys, alternator bracket and water pump. Thanks for the reply, let me know what you have.
last 2 balancers i sold went for $75 plus shipping the guy is buying everyone i have for that amount last good timing cover i sold and i sold 2 of them one went for $87 and the other went for $85 as a second chance offer if you want the pump and line with the gas bulb on it $25 to the v8 board i know what i'll get on ebay but this board helps me alot and prices are way lower just for all the help given me from you guys the bad part is on one of the top bolt holes it would need to be heled from another for sure i am going to do that but would need time to get it done otherwise if you want the cover the way it is $30 and you fix it i have a good used water pump as well no holes broke on it/spins freely and looks good by the seal no garutees for sure on it would you not want to buy a new one for use? let me know Greg
I have an NOS water pump, the pulleys,brackets and the hard line from the fuel pump with attached glass filter bowl.......Peace WildBill
Okay, application wise I'm looking to setup a '63 401 with power steering and no A/C. I'd be interested in seeing a picture of the damage to the timing cover. Will your NOS waterpump work on my application? Let me know some prices.