1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

Building a 482

Discussion in 'Tri Shield Performance' started by pphil, Mar 3, 2019.

  1. pphil

    pphil Well-Known Member

    As the title states i am building a 482 and need to buy

    Pistons
    Rings
    Rods

    Can i get a price shipped to
    210 garwood dr
    Nashville tn
    37210

    Thanks scott
     
  2. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD" Staff Member

    Scott, just call Jim Weise, (320) 629-8999
     
  3. Jim Weise

    Jim Weise EFI/DIS 482

    Thanks Larry.. I saw this yesterday and PM'ed the prices to Scott... took his order this morning

    JW
     
    Steve Reynolds likes this.
  4. stagedgs

    stagedgs 1967 GS400

    Jim-
    Regarding the 482 pistons, what is expected compression ration with cylinder heads that have 64-66cc chambers? Who makes these pistons if I may ask, and what is their part number?

    Thanks,
     
  5. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD" Staff Member

    Mike, the Diamond and Autotec pistons are customizable. You can specify the compression height as well as the piston valve relief cc’s. That way you can run zero deck and dial in the static compression according to your needs.
     
  6. Waterboy

    Waterboy Mullet Mafia since 6/20

    Larry,
    Can diamond or auto Tech make 430 piston’s? I need 30 over pistons. Thanks, John
     
    sean Buick 76 likes this.
  7. sean Buick 76

    sean Buick 76 Buick Nut

    yes that’s not an issue. I have custom pistons from both companies
     
    Waterboy likes this.
  8. LARRY70GS

    LARRY70GS a.k.a. "THE WIZARD" Staff Member

    Waterboy likes this.
  9. Waterboy

    Waterboy Mullet Mafia since 6/20

    Thank you Larry!
     
  10. Thumper (aka greatscat)

    Thumper (aka greatscat) Well-Known Member

    Be prepared for over a 2 month wait though
    Everything is back ordered.
     
    Waterboy and sean Buick 76 like this.

Share This Page